Preparing The Display Unit - Panasonic TY-WK98PV1 Installation Instructions Manual

Attaching (continued)

Preparing the Display Unit

Attention
z Perform the work to attach a large display unit carefully using a lifting device (machine) because it is heavy.
The display unit illustration may differ from the actual display unit, depending on the model. The following
illustration is one example of a compatible model.
z When performing the suspension work, attach eye bolts to the display unit in order to suspend the display unit.
z Use eye bolts with a diameter of ø41 mm (1.62") or less.
If the diameter of the eye bolts exceeds ø41 mm (1.62"), you will not be unable to attach the eye bolts because
the eye bolts and display unit will interfere with each other.
z There are operation parts on the rear of the display unit. Take care not to bump them against anything nearby
during installation.
z If disconnecting and connecting the power cord and connection cables at the back of the display unit will be
difficult, connect them to the display unit before installation.
z Take care that the cord and cables do not become entangled. Insert the plug in the outlet after the installation is
completed.
ø41 mm (1.62")
or less
Eye bolt
Set mount
ENGLISH - 21