Panasonic TY-WK98PV1 Installation Instructions Manual page 15

Assembling the Bracket to Match the Display Unit Installation Pitch (continued)
B
600/800
500
400
C
F
Side base plate
A-10
Base plate
(Lower)
E
400
500
600/800
Position to attach the base plate
When installation pitch of display
unit is 600 or 800
Base plate (Upper)
Side base plate
Base plate (Lower)
Base plate (Upper)
G
Side base plate
A-10 A
A-10
Place the side base
plate so that the part
number label can be
seen.
When installation pitch of display
unit is 500
Base plate (Upper)
Base plate (Lower)
3) Attach the side base plate to the base plates
(upper and lower)
A Place the side base plates so that the surfaces
with the part number labels affixed are facing up.
B Confirm the positions of the  holes at the upper
part of the side base plates as shown in the figure.
z The installation positions differ depending on
the display unit installation pitch.
C Place the left side of the base plate (upper) over
the upper part of one of the side base plates
D
and fix it in place with two countersunk screws.
D Place the right side of the base plate (upper)
over the upper part of the other side base plate
and fix it in place with two countersunk screws.
E Confirm the positions of the  holes at the
lower part of the side base plate as shown in
the figure.
F Place the left side of the base plate (lower) over
the lower part of the side base plate on the left
side and fix it in place with two countersunk
screws.
G Place the right side of the base plate (lower) over
the lower part of the side base plate on the right
side and fix it in place with two countersunk screws.
(Tightening torque: 1.4 to 1.6 N•m)
Attention
z When attaching the base plate (upper) and base
plate (lower), place them so that the  holes in the
side plate are half hidden.
When installation pitch of display
unit is 400
Side base plate
Base plate (Upper)
Side base plate
Base plate (Lower)
ENGLISH - 15