Panasonic TY-WK98PV1 Installation Instructions Manual page 5

Wall-hanging bracket vertical mounting type, commercial use
Table of Contents

Advertisement

Safety Precautions (continued)
■ We shall have no liability for any accidents or damage incurred by installing the product in any
manner other than as provided in the Installation Instructions, or without using parts specified.
Precautions for Installation Work
■ Do not let people other than installation specialists carry out the installation work.
Improper installation may cause the display unit to drop, and may cause injury.
■ This unit is a wall-hanging bracket for installing a display unit vertically.
Do not use it in places that are not vertical.
■ To ensure correct display performance and prevent trouble,
do not install in any of the following locations.
z Near sprinklers or fire/smoke detectors
z Near high-voltage wires or dynamic power supplies
z Locations exposed to air blown from heating
equipment
■ Install using techniques suited to the structure and materials of the installation location.
■ Use commercially available bolts that are suited to the material (wood, steel frame,
concrete, etc.) of the wall surface to which the wall-hanging bracket is to be attached.
■ Ensure good air flow so that the equipment ambient temperature does not exceed 40°C
(104°F).
Failure to do this may cause heat to build up inside the display, and may cause malfunction.
■ Spread a soft blanket or cloth over the floor so that the display and floor will not be
marked or scratched during the assembly and installation work.
■ When screwing down the parts, ensure that the screws are neither insufficiently tightened
nor over tightened.
■ For the display power supply plug, use a power supply outlet that can be reached easily.
■ Take sufficient care to ensure safety around you when performing the assembly and
installation work or while moving about during the course of the work.
■ Do not install the display underneath ceiling lamps (spotlights, halogen lamps, etc.).
Otherwise, the cabinet may be bent or damaged by high heat.
To the Installation Contractor
■ If the wall-hanging bracket installation and display unit installation work are performed
by different contractors, please ensure that this manual is passed from the wall-hanging
bracket installation contractor to the display unit installation contractor after the wall-
hanging bracket installation work is completed.
■ Please give this manual to the customer after the installation work is completed.
z Where there is a risk of exposure to vibration or impact
z Near sources of magnetism, heat, water vapor or soot
z Where droplets of condensation from an air conditioner
or other unit may form
ENGLISH - 5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents