Loading - Haier QDT125 Series Owner's Manual

USING THE DISHWASHER
For best dishwashing results, follow these loading guidelines. Features and appearance of racks and silverware baskets
may vary from your model.
UPPER RACK
The upper rack is for glasses, cups, and saucers. This is also
a secure place for dishwasher-safe plastic items. The upper
rack can be used for odd sized utensils. Sauce pans, mixing
bowls, and other similarly shaped items should be placed face
down for best wash performance.
The cup shelf may be placed in the up or down position to add
flexibility.
IMPORTANT: Ensure that items do not protrude through the
bottom of the rack where they will block the rotation of the
upper spray arm. This could result in noise during operation
and/or poor wash performance.
8
UPPER RACK - ADJUSTMENT
A loaded upper rack may be heavier
CAUTION
than anticipated. To prevent minor
injury or damage to the contents, do not raise or lower the
upper rack after the rack is loaded.
The upper rack may be adjusted to accommodate larger
items.
To adjust the upper rack:
1
Fully extend the upper rack and rotate open the two plastic
end caps on the front of the rails.
Remove:
2
Remove the upper rack.
3
Select the set of rollers on the side of the rack that
provides the desired height, and reinstall the upper rack by
guiding the rack rails between the appropriate set of
rollers.
Replace:
Rollers
End
Cap
4
With the rack reinstalled, rotate closed the two plastic end
caps, ensuring the snap is properly engaged. Failure to
properly engage the end caps may result in the rack falling
from the dishwasher.
End Cap
Rail
Rollers
Rail
49-55125-1