How To Fill Rinse Aid And Detergent Dispenser; Loading The Rinse Aid - Haier DW12-PFE2-U Service Manual

Serial Number: FA0510E0H00/FA05V0E0400 Version:00.00 Edition: 2007-3
Dishwasher
Model: DW12-PFE2-U/DW12-PFE2ME-U

7. How to fill rinse aid and detergent dispenser

7.1 how to fill rinse aid
Rinse aid
This product makes dishes sparkle and helps them to dry without spotting. The dispenser is
located on the inside panel of the door .
When the low rinse aid indicator " H " lights ,
you must load rinse aid .

Loading the rinse aid

Regardless of the type of detergent dispenser installed
on your appliance, you must proceed as indicated below
when loading the rinse aid.
To open the dispenser, turn the "3" cap in an
anti-clockwise direction and then pour in the rinse aid,
making sure not to overfill. The amount of rinse aid
used for each cycle can be regulated by turning the " 4"
dose adjustor, located beneath the "3" cap, with a
screwdriver. There are 6 different settings;
the normal dosage setting is 3.
Page 12 / 38