Connecting To A Computer - Sanyo PLC-XU74 Owner's Manual

Connecting to a Computer

Cables used for connection
• VGA Cables (Mini D-sub 15 pin) (Only one cable is supplied.)
• USB Cable
• Audio Cables (Mini Plug: stereo)
( Not all the cables are supplied with this projector.)
Audio Output USB port
Audio cable
(stereo)
COMPUTER/
COMPONENT
AUDIO IN
Note:
✔
• Input sound to the COMPUTER/COMPONENT
AUDIO IN terminal when using the COMPUTER
IN 1/COMPONENT IN and the COMPUTER IN /
MONITOR OUT terminal as input.
• When connecting the AUDIO OUT to external
audio equipment, the projector's built-in speaker is
disconnected.
• W h e n t h e c a b l e i s o f t h e l o n g e r v a r i e t y, i t
i s a d v i s a b l e t o u s e t h e C O M P U T E R I N 1 /
COMPONENT IN and not the COMPUTER IN /
MONITOR OUT.
• See page 63 for ordering optional parts.
Monitor Output
VGA cable
USB cable
COMPUTER IN 1/
USB
COMPONENT IN
Monitor Output
or
Monitor Input
VGA cable
COMPUTER IN /
MONITOR OUT
This terminal is switchable.
Set up the terminal as either
Computer input or Monitor
output. (See Page 46.)
Unplug the power cords of
both the projector and external
equipment from the AC outlet
before connecting cables.
Installation
External Audio Equipment
Audio Input
Audio cable
(stereo)
AUDIO OUT
(stereo)
15