Sanyo PLC-XU74 Owner's Manual page 29

Display area H
Adjust the horizontal area displayed by this projector.
Press the Point buttons to decrease/increase the
7 8
value.
Display area V
Adjust the vertical area displayed by this projector.
Press the Point buttons to decrease/increase the
7 8
value.
Reset
To reset the adjusted data, select Reset and press
the SELECT button. The confirmation box appears
and then select [Yes]. All adjustments return to their
previous figures.
Mode free
To clear the stored data, move the red framed pointer
to the Mode free item and then press the SELECT
button. Move the red arrow pointer to the Mode that
you want to clear and then press the SELECT button.
Store
To store adjusted data, move the red framed pointer
to the Store item and then press the SELECT button.
Move the red arrow pointer to any of Mode 1 to 5 in
which you want to store and then press the SELECT
button.
Quit
Exit the PC Adjust Menu.
Note:
✔
Display area (H/V) cannot be selected when 480i,
575i, 480p, 575p, 70p, 1035i, or 1080i is selected
in the PC System Menu (p.6).
Computer Input
Move the red framed
pointer to an item and
press the SELECT button.
This Mode has stored parameters.
To clear adjusted data
Vacant Mode Values of "Total dots",
"Horizontal", "Vertical",
"Display area H" and
"Display area V".
To store adjusted data
Close this dialog box.
9