Video System Selection - Sanyo PLC-XU74 Owner's Manual

Video Input

Video System Selection

1
Press the MENU button to display the On-Screen
Menu. Press the Point
red framed pointer to the AV System Menu icon.
2
Press the Point
pointer to the system that you want to select and
then press the SELECT button.
Video or S-Video
Auto
The projector automatically detects incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system
manually.
PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N
If the projector cannot reproduce proper video image,
it is necessary to select a specific broadcast signal
format among PAL, SECAM, NTSC, NTSC 4.43,
PAL-M, and PAL-N.
Component
Auto
The projector automatically detects incoming video
signal, and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image,
it is necessary to select a specific component video
signal format among 480i, 575i, 480p, 575p, 70p,
1035i, and 1080i.
Note:
✔
The AV System Menu cannot be selected when
selecting RGB (Scart).
36
buttons to move the
7 8
buttons to move the red arrow
ed
AV System Menu (Video or S-Video)
AV System Menu icon
Selected system is
displayed.
Move the pointer to a
system and press the
SELECT button.
AV System Menu (Component)
AV System Menu icon
Selected system is
displayed.
Move the pointer to a
system and press the
SELECT button.