Vacon alfiff28 User Manual page 29

description of parameters
2.6.2 DIN3 function
This parameter has 8 selections. If digital input DIN3 need not be used, set the
parameter value to 0.
1 Speed curve2
2 Ext Fault close
3 Ext Fault open
4 Fault reset
5 Run enable
6 Emergency stop CC
7 Emergency stop OC
8 Override speed
9 Brake open enable
2.6.3 DIN4 (Analog input 1) function
The analog input 1 is used as digital input DIN4.
Selections are the same as for Parameter 2.6.2
2.6.4 DIN5 (Analog input 2) function
The analog input 2 is used as digital input DIN5.
Selections are the same as for Parameter 2.6.2
2.6.5 Expander board DIE1 function
Function selection for Expander board digital input DIE1.
Selections are the same as for Parameter 2.6.2
2.6.6 Expander board DIE2 function
Function selection for Expander board digital input DIE2.
Selections are the same as for Parameter 2.6.2
2.6.7 Expander board DIE3 function
Function selection for Expander board digital input DIE3.
Selections are the same as for Parameter 2.6.2
24-hour support +358 (0)40 837 1150 • Email: vacon@vacon.com
vacon • 29