Advertisement
Quick Links
SAVE AND READ THESE INSTRUCTIONS
TESTED IN ACCORDANCE WITH THE LATEST EDITION OF ANSI Z21.1 STANDARD FOR
HOUSEHOLD COOKING APPLIANCES.
CONVENTIONS USED IN THESE INSTRUCTIONS
WARNINGS:
Must be followed carefully to avoid personal injury.
IMPORTANT:
Must be followed carefully to avoid damage.
NOTES:
Contain helpful hints and tips to facilitate the installation.
IMPORTANT
1. Before beginning installation, please thoroughly read and become familiar with these instructions.
2. Installation and service must be completed by a qualified installer or service agency.
3. Installer: Please leave these Installation Instructions with the owner.
4. Owner: Please keep these instructions for local electrical inspector's use and for future reference.
5. Read the accompanying Use & Care Manual prior to operating this appliance.
TABLE OF STEPS
STEP 1
Planning the installation
STEP 2
Electrical connections
STEP 3
Installing the IHL
STEP 4
Verifying proper operation
Part No. 65268 Rev. A
Installation Instructions
Custom Hood Liners
Page 2
Page 3
Page 3
Page 3
Advertisement
Related Manuals for Dacor IHL42
Summary of Contents for Dacor IHL42
- Page 1 Installation Instructions Custom Hood Liners SAVE AND READ THESE INSTRUCTIONS TESTED IN ACCORDANCE WITH THE LATEST EDITION OF ANSI Z21.1 STANDARD FOR HOUSEHOLD COOKING APPLIANCES. CONVENTIONS USED IN THESE INSTRUCTIONS WARNINGS: Must be followed carefully to avoid personal injury. IMPORTANT: Must be followed carefully to avoid damage.
- Page 3 WARNINGS: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: a) Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer. b) Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally.
-
Page 4: Installation Planning
The Dacor Integrated Hood Liner (IHL) is constructed with non-combustible stainless steel material. The IHL dimensions and installation design technique makes this an excellent component for any custom hood structure. In addition Dacor offers two Power Pack products (IVS1 and IVS2) which conveniently install on the pre-mounted installation lugs around the Power Pack opening at the top of the hood liner. - Page 5 2. Check the electrical connections to ensure that the installation has been completed correctly. 3. Repeat the above test. 4. If the appliance still does not work, contact an authorized DACOR service company at (800) 772-7778, or at www.dacor.com. Do not attempt to repair the appliance yourself.
- Page 6 NOTES Page 4...
- Page 8 Web Site: www.dacor.com For a Dealer/Service: (800) 772-7778 Corporate Phone: (800) 793-0093...