P. Energy L150A User And Maintenance Handbook page 19

......................................................
RECIPE PAGE
The recipe page includes all parameters concerning the management of
machine.
Each lamination cycle is divided into 19 steps + 1 step for prestart values.
The data is sorted progressively in 3 consecutive pages.
In the recipe pages it is possible to modify the time, temperature and
vacuum vales regarding the lamination cycle. The recipe will move
forward to the following step only if all the set conditions in the relative
fields will be reached.
In the last step the "T.Temp. field must be 9999.
Following the description of the adjustable parameters:
1. dur(s): working time of recipe step
2. Temp(°C): heating plate temperature
3. Vup(mB):Upper chamber vacuum value
4. Vdw(mB):Lower chamber vacuum value
It's advisable to keep a backup copy of set values if you want to do
different types of working cycles.
P.Energy P.Energy P.Energy P.Energy
USER AND MAINTENANCE HANDBOOK L150A
19 - 30