A Note About Nozzles - MAKERGEAR M2 User Manual

A Note About Nozzles

The nozzle is the brass conical piece with a six sided base. It attaches
to the other parts of the hot end and dispenses material through a
precisely sized hole.
If you wish to remove or change the nozzle, you must first remove the
entire hot end. Attempting to unscrew the nozzle directly from the M2
will damage the hot end.
Some of our users choose to print with nozzles that are either larger or
smaller than the 0.35 mm nozzle included on the M2 in order to
accommodate specific printing needs. If you plan to print with different-
sized nozzles, we recommend keeping each nozzle installed in a
separate hot end, as this allows you to switch between nozzles more
easily.
Visit the MakerGear YouTube channel for step-by-step instructions on
how to remove the V4 hot end and remove/mount a nozzle.
7