Connecting To Optional Equipment; Connecting To The Wireless Microphone Antenna; Setting The Wireless Microphone Channel - LG LF-K5932 Owner's Manual

Connections

Connecting to Optional Equipment

[Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2 or DTS)
C
onnect the OPTICAL OUT jack on the unit to the
OPTICAL IN jack on your amplifier. Use an optional
audio cable.
Caution:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
The sound is muted during playback on an audio CD
recorded in dts.
Notes
– If the audio format of the digital output does not
match the capabilities of your unit, the DVD Karaoke
will produce a strong, distorted sound or no sound at
all.
– Six Channel Digital Surround Sound via digital con-
nection can only be obtained if your unit is equipped
with a Digital Multi-channel decoder.
– To see the audio format of the current unit in the On-
Screen Display, press AUDIO.
Connecting to the Wireless microphone
antenna
When you use the wireless microphone, connect the
supplied wireless microphone antenna to the wireless
microphone antenna jack of the unit.
Setting the Wireless microphone
Channel
If there is a similar wireless microphone product
nearby, interference may occur. In this case, change
the channel switch to other channel, and turn off the
power, then turn on again.
By using the Channel Switch, set the same channel.
[Wireless microphone]
Open the cover.
ON
You can set the channel change with 10 types.
Channel switch number
1 2 3
ON OFF OFF OFF
OFF ON OFF OFF
ON ON OFF OFF
OFF OFF ON OFF
ON OFF ON OFF
OFF ON ON OFF
ON ON ON OFF
OFF OFF OFF ON
ON OFF OFF ON
OFF ON OFF ON
Wireless microphone
antenna
[Rear panel of the unit]
CHANNEL
4
3
2
1
OFF ON
Channel number
4
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
CH10
13