Connecting To Optional Equipment; Connections - LG DKS-6100Q Owner's Manual

Connections

Connecting to Optional Equipment

Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and Right AUDIO OUT jacks on the
DVD Player to the audio left and right in jacks on your
amplifier, receiver, or stereo system, using the audio
cables (A).
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2, or DTS)
Connect one of the DVD Player's DIGITAL AUDIO OUT
jacks (OPTICAL O or COAXIAL X) to the corresponding
in jack on your amplifier. Use an optional digital (optical
O or coaxial X) audio cable.
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your DVD Player (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Caution:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
Rear of DVD player
O X
OPTICAL COAXIAL
DIGITAL INPUT
Amplifier (Receiver)
– If the audio format of the digital output does not match
– Six Channel Digital Surround Sound via digital con-
– To see the audio format of the current DVD in the on-
Analog connection to a multi-channel A/V receiver
with 6 Channel connectors (Dolby Digital, DTS)
This DVD Player contains a multi-channel decoder. This
enables playback of DVDs recorded in Multi-channel
Surround without the need for an optional decoder.
1
2 2
3 3
4
A
L
R
AUDIO INPUT
Notes
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
nection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
screen display, press AUDIO.
Connect the CENTER and WOOFER jacks for the
Center speaker and the Subwoofer (C) to the corre-
sponding in jacks on your receiver.
Connect the Left and Right FRONT speaker jacks
(F) to the corresponding in jacks on your receiver.
Connect the Left and Right REAR speaker jacks
(R) to the corresponding in jacks on your receiver.
Make the appropriate Sound settings for Analog
Output and Speaker Settings in the setup menu.
See page 13.
Rear of
DVD player
Front R
Rear R
ANALOG 5.1CH AUDIO INPUT
R
F
C
Front L Center
Rear L Subwoofer
Amplifier
(Receiver)
9