Connections; Fitting The System Connection Cables - LG LF-K5932 Owner's Manual

Connections

Fitting the system connection cables

• Your unit consists of two separate parts, Cassette tape player/DVD/KARAOKE player and an integrated Tuner/
Amplifier.
• Before you can use your unit, the separate parts must be connected with the supplied system connection cables.
• Make sure that all connections are made with your unit unplugged from the mains supply.
Cassette tape player/
DVD/KARAOKE Player
Tuner/ Amplifier
1 1
Stack the parts of your unit in the order shown
above.
Position your unit so that you have easy access to
the rear of it.
2 2
Connect the SYSTEM JACK1 on the Cassette
tape player/DVD/KARAOKE Player to the
SYSTEM JACK1 connector on the Tuner/
Amplifier.
3 3
Connect the SYSTEM JACK2 connector on the
Cassette tape player/DVD/KARAOKE Player
player to the SYSTEM JACK2 connector on the
tuner/ Amplifier.
4 4
Connect the LUG cable to the LUG connector
on the unit with the supplied hand screw.
10
otes
The system connection cables will only connect and should
'click' into place, do not try to force them.
If you need to unplug the system connection cables,
squeeze both sides of each plug before pulling it out - this
will 'unlock' the plug and allow it to be released.