Table of Contents
Advertisement
Connections
Connecting to Optional Equipment
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and Right AUDIO OUT jacks on the
DVD Player to the audio left and right in jacks on your
amplifier, receiver, or stereo system, using the audio
cables (A).
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2, or DTS)
Connect one of the DVD Player's DIGITAL AUDIO OUT
jacks (OPTICAL O or COAXIAL X) to the corresponding
in jack on your amplifier. Use an optional digital (optical
O or coaxial X) audio cable.
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your DVD Player (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Caution:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
Rear of DVD player
O
X
A
OPTICAL
COAXIAL
L
R
DIGITAL INPUT
AUDIO INPUT
Amplifier (Receiver)
Notes
– If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
– Six Channel Digital Surround Sound via digital con-
nection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
– To see the audio format of the current DVD in the on-
screen display, press AUDIO.
Analog connection to a multi-channel A/V receiver
with 6 Channel connector (Dolby Digital, DTS)
This DVD Player contains a multi-channel decoder. This
enables playback of DVDs recorded in Multi-channel
Surround without the need for an optional decoder.
1
Connect the CENTER and WOOFER jacks for the
Center speaker and the Subwoofer (C) to the corre-
sponding in jacks on your receiver.
2 2
Connect the Left and Right FRONT speaker jacks
(F) to the corresponding in jacks on your receiver.
3 3
Connect the Left and Right REAR speaker jacks
(R) to the corresponding in jacks on your receiver.
4
Make the appropriate Sound settings for Analog
Output and Speaker Settings in the setup menu.
See page 13.
Rear of
DVD player
Front R
Front L
Rear R
Rear L
ANALOG 5.1CH AUDIO INPUT
R
Connect to a USB port of multimedia (USB
memory etc.)
1
Connect the USB port of a USB Memory (or MP3
player, etc.) to the USB HOST on the front of the unit.
Front of DVD player
USB Memory, MP3 Player (or
Memory Card Reader, etc.)
2 2
Select USB function pressing the USB button on
the remote control.
otes
The DivX files in your memory card will not be able
to be played.
Don't insert the more than one memory card in the
multi card reader.
The unit may not be supported a part of memory
card or multi card reader.
Don't insert or pull out the memory card from the
card reader when using the card reader.
F
C
Center
Subwoofer
Amplifier
(Receiver)
9
Advertisement
Table of Contents
