Display - LG LF-K5932 Owner's Manual

Before Operation

DISPLAY

DISPLAY
TV Aspect
Display Mode
Progressive Scan
TV Aspect
DVD
4:3: Select when a standard 4:3 TV is connected.
16:9: Select when a 16:9 wide TV is connected.
Display Mode
DVD
Display Mode setting works only when the TV Aspect
mode is set to "4:3".
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Panscan: Automatically displays the wide picture on
the entire screen and cuts off the portions that do not fit.
22
Progressive Scan
Progressive Scan Video provides the highest quality
16 : 9
pictures with less flickering.
Widescreen
If you are using the Component Video jacks for connec-
Off
tion to a TV or monitor that is compatible with a pro-
gressive scan signal, set Progressive Scan to On.
To Turn ON progressive scan:
Connect component out of the DVD to the input of your
Move Select
monitor/television, set your television or monitor to
Component Input.
1. Select "Progressive Scan" on the DISPLAY menu
2. Select "On" using the
3. Press SELECT/ENTER to confirm your selection.
4. When the confirm menu appears on your screen
5. Pressing ENTER will set the player to Progressive
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
2) Press and hold STOP ( x ) for five seconds then
DVD
then press .
/
The confirm menu will appear.
DISPLAY
TV Aspect
Display Mode
Progressive Scan
Prev.
Cancel is highlighted as default. Use the
buttons to highlight Enter.
scan mode.
Caution
tray. See that "NO DISC" is displayed on the display
window
release it. The video output will be restored to the
standard setting, and a picture will once again be
visible on a conventional analog TV or monitor.
buttons.
Off
On
Move Select
/