Table of Contents
Advertisement
Video Input
Screen Size Adjustment
This projector has the picture screen resize function, which enables you to customize the image size.
1
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
frame pointer to the Screen Menu icon.
2
Use the Point ▲▼ buttons and move the red frame
pointer to the desired function and then press the
SELECT button.
Normal
Provide the image to fit the screen size while maintaining
the aspect ratio of input signal.
Full
Provide the full screen image.
Zoom
Pan the horizontal direction of the image and cut the vertical
direction of the image to fit the screen size (16:9).Only for
4:3 video aspect ratio signals.
Wide
Provide the image at a wide screen ratio of 16:9.
Natural wide
Modify the 4:3 aspect ratio image to fit the screen size(16:9
aspect ratio) by stretching the image to make it look natural.
Custom
Adjust the screen scale and position manually.
Press the SELECT button at Custom icon. "Custom" is
displayed on the screen for a few seconds and then the
Aspect dialog box appears.
Scale H/V......... A djust the Horizontal/Vertical screen scale.
H&V ............... W hen selecting "On," the aspect ratio
is fixed. "Scale V" appears dimmed and
becomes unavailable. Adjust Scale H, then
the screen scale is automatically modified
based on the aspect ratio.
Position H/V...... A djust the Horizontal/Vertical screen
position.
Common ......... S ave the adjusted scale to all the inputs.
Press the SELECT button at Common to
display the confirmation box. To save the
scale, press the SELECT button at "Yes."
When Custom is selected, the saved scale
is used.
Reset ............ R eset the all adjusted values. Press the
SELECT button at Reset to display the
confirmation box. To reset, press the
SELECT button at "Yes."
40
Screen Menu
Screen Menu icon
Move the red frame pointer to
the desired function and press
the SELECT button.
Press the SELECT button at
Common or Reset, to display
the confirmation box.
Note:
• Z oom, Wide and Natural wide are not
available when 720p, 1035i, or 1080i is
selected in the AV System Menu (p.36).
• W hen no signal is detected, Normal is
set automatically and Aspect dialog box
disappears.
•The adjustable range of Scale H/V and
Position H/V can be limited depending on
the input signal.
• Zoom, Natural wide and Wide are not
available when the 4:3 or 16:9 function
is selected in the Screen aspect(p.44).
Advertisement
Table of Contents
