Removing the System Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
NOTE: Your computer's Service Tag is stored in the system board. You
must enter the Service Tag in the system setup after you replace the
system board.
NOTE: Before disconnecting the cables from the system board, note the
location of the connectors so that you can reconnect them correctly
after you replace the system board.
Prerequisites
1
Remove the
2
Remove the
3
Remove the
4
Remove the
5
Remove the
6
Remove the
7
Remove the
stand
assembly.
back
cover.
VESA-mount
bracket.
memory
module(s).
system-board
shield.
wireless
card.
heat
sink.
Computer. After working inside your
After Working Inside Your
61