Removing the Memory
Module(s)
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1
Remove the
2
Remove the
Procedure
1
Using the pull tab, slide the memory-module shield and remove it from
the system-board shield.
1
memory-module shield
2
Use your fingertips to spread apart the securing clips on each end of the
memory module connector until the memory module pops up.
30
stand
assembly.
back
cover.
Computer. After working inside your
After Working Inside Your
2
system-board shield