Brewing In Automatic Mode; Controls Layout And Icon Definitions - Fetco CBS-2121 ZURICH TS User Manual

BREWING IN AUTOMATIC MODE Controls layout and icon definitions
READY
START
200°F
TEMP.
MODE Automatic
BREWER "READY"
SCREEN 1)Brewer is ready to brew, Press "START" icon box
3) Brew is proceeding, STOP icon disappears,
carafe flashing to show that brew is in progress
Final Screens
SCREEN 5)
"HEATING" indicates that
hot water tank temperature
is below setpoint.
START icon will reappear
when hot water tank
temperature reaches
setpoint
Upper warmer icon: "ON"
"READY" to brew icon
"START" icon in box
Full/Half batch: "FULL"
Hot water tank temp. in
degrees Fahrenheit
(customer adjustable)
Lower warmer icon: "ON"
Brewer in Automatic Mode
SCREEN ICON DEFINITIONS
READY
START
200°F
TEMP.
MODE Automatic
READY
START
STOP
4:30
TIME.
MODE Automatic
HEATING
START
193°F
TEMP.
MODE Automatic
Go to fetco.com for the latest versions of all information
Upper warmer icon: "OFF"
After touching "START"-carafe icon
flashes to show "Brew In Progress"
Brewer continues drip-out from
brew basket until completed.
-STOP" icon stops brew,
Brew Time (customer adjustable)
(4:30min+1:30min sec drip) is
based upon flow rate and volume
selected.
Lower warmer icon: "OFF"
Touch warmer icons to toggle
2)Brew started; time is displayed, Full Batch icon flashes.
Outer frame for Full Batch icon is hidden
4) Brewer is in drip-delay mode, 1:30min time-out
Carafe icon steady. Outer frame flashes to show drip-out
Ready To Brew
HEATING COMPLETE
READY TO BREW
START icon is visible
Page 7
STOP
6:00
TIME.
MODE Automatic
BREW STARTED...
READY
START
STOP
6:00
TIME.
MODE Automatic
STOP
4:30
TIME.
MODE Automatic
READY
START
200°F
TEMP.
MODE Automatic
P169 NOVEMBER 2018