Download  Print this page

Fetco CBS-2131XTS User Manual

Hide thumbs

Advertisement

CBS-2131XTS & CBS-2132XTS 3- liter airpot brewers
Contact Information........................................................ 2
Description & Features .................................................. 2
Factory settings.............................................................. 2
Layout of the brewer ...................................................... 3
Operating Instructions.................................................... 4
Menu Features: Batch Parameters................................ 7
How to calibrate the flow rate....................................... 10
Operator Training......................................................... 12
Final Setup for Operators............................................. 13
Safety Notes................................................................. 13
FETCO®, LUXUS®, EXTRACTOR®, INTERMITTENT BREW, Driven To Innovate, XTS are trademarks or trade names of Food Equipment Technologies Company.
U.S. Patent 7,866,255 7,631,593 6,889,598 6,772,676 6,576,282 6,571,685 6,565,906 6,705,208 6,148,717 6,713,109 & Other Patents Are Pending
© 2013 Food Equipment Technologies Company
®
NOTICE TO INSTALLER: Please leave this book with the machine.

Table of Contents

User's Guide
Models:
CBS-2131
CBS-2132
One gallon and three liter
single and dual airpot brewers
CBS-2131XTS & CBS-2132XTS 1-gallon airpot brewers
Error Codes ..................................................................14
CBS-2130XTS -Technical Data....................................15
Utility Requirements .....................................................16
Installation Directions ...................................................20
Parts diagrams, North America ....................................23
Spray Housing Assembly Parts....................................23
Brewbasket Parts .........................................................23
Wiring Diagrams-North America...................................43
P123 - Universal Version
XTS
XTS
Revision 001: October 2014

Advertisement

Table of Contents

   Also See for Fetco CBS-2131XTS

   Related Manuals for Fetco CBS-2131XTS

   Summary of Contents for Fetco CBS-2131XTS

  • Page 1: Table Of Contents

    Wiring Diagrams-North America........43 Safety Notes..............13 FETCO®, LUXUS®, EXTRACTOR®, INTERMITTENT BREW, Driven To Innovate, XTS are trademarks or trade names of Food Equipment Technologies Company. U.S. Patent 7,866,255 7,631,593 6,889,598 6,772,676 6,576,282 6,571,685 6,565,906 6,705,208 6,148,717 6,713,109 & Other Patents Are Pending ©...
  • Page 2: Contact Information

    SD card firmware program and upgrade installation SD card Backup for menu items User selectable Universal Electrical Connection Flexible electrical installation configuration Designs, materials, specifications, physical dimensions, firmware and software protocol for equipment or replacement parts are subject to review and change by FETCO without notice...
  • Page 3: Accessing Equipment And Control Screens

    Accessing equipment and control screens Layout of the brewer Touch-screen for brewer operation Brew basket sensor (internal) SD card interface port (Load & Save) Hot Water Faucet Airpot or Dispenser Locator Main power switch Slide out back panel for service access Accessing batch and programming menu screens Regular 1 0.80...
  • Page 4: Operating Instructions

    To brew a single 3 liter coffee batch, using default recipe NOTES FETCO CBS-2130XTS series equipment is factory calibrated and preloaded with recipes and is ready to brew. Place 13”X5” paper filter in brew basket -FETCO Product # F002 or any 13”X5”...
  • Page 5 Brewing-shown by touchscreen Brewer screens displayed for brewing NOTES CBS-2131XTS CBS-2132XTS SINGLE SIDE TWIN SIDE Note: There are three ™ ™ EXTRACTOR EXTRACTOR “BREW AT TEMPERATURE DEFINITONS”. “READY SCREEN” TOUCHSCREEN TOUCHSCREEN CBS_2131 3L CBS_2132 3L Tap screen to display menus The “Brew At Temperature ”—“ON”...
  • Page 6: Programming-operator Access Programming

    Programming-operator access programming -The FETCO CBS-2100XTS brewers have four brew batch menus per side. Menus are preprogrammed by the factory with basic settings that will operate the equipment as purchased. There are two batches each marked “Regular” and two marked “Decaf”...
  • Page 7: Menu Features: Batch Parameters

    Batch 4 Right ** Batch Copy Copy From Batch R1-R4 Copy To Batch R1-R4 R1 R2? Copy? |_______________ (example) Batch 1&4 cannot be disabled. ( Batch 1 cannot be disabled. ( Batch can be disabled, and removed from display CBS-2132XTS CBS-2131XTS...
  • Page 8 Programming Factory set Programming Range GENERAL Notes Items Default (display) 200 °F Correction for high 200°F Tank Temp. |______________[]___| altitude below “OFF” allows Brew at Temp. “ON” SEE NOTE BELOW! |________[]_______| brewing at any ON AUTO temperature. °F • Temperature Units of Meas.
  • Page 9 Show Summary • FR=Flow Rate ml/min Screen Contrast Output Summary Screen Brightness Touch To Return CBS-2131xts Single Series displays RIGHT SIDE only TEST Runs Valve to verify flow. Right Valve • Right Valve Test (Press to test) Press To Test...
  • Page 10: How To Calibrate The Flow Rate

    For factory or qualified service professional use only How to calibrate the flow rate Set the flow rates of components to adjust for taste profile and for over or under potting. Built-in algorithms in Brewer controller software corrects brew parameter to customer preferences or to trim variations in flow control components NOTICE: This operation requires operator hold finger on keypad position for one minute—without lifting it.
  • Page 11: Demo Mode

    Programming Factory set Programming Range OTHER Notes Items Default (display) See Error Code Chart Error Codes • Display Errors (Codes) for references Reset !!Errors must be • Reset Errors (Reset) |_______________[]____| corrected and cleared!! Setup upload Brewer --------------------------------------------------------------------------- Copy Program •...
  • Page 12: Operator Training

    Operator Training Review the operating procedures with whoever will be using the brewer. Pay particular attention to the following areas: 1. Always pre-heat the dispensers before the first use of each day by filling them half way with hot water, and letting them stand for at least 5 minutes.
  • Page 13: Final Setup For Operators

    5. Do not attempt to move hot beverage equipment once it is filled. Drain equipment before moving. 6. FETCO commercial coffee brewers prepare large amounts of coffee or tea in a single batch using very hot water 7. Commercial coffee brewers provides very hot water from the sprayhead, brewbasket and faucet when it is pulled.
  • Page 14: Error Codes

    Error Codes Contact specialized personnel for error codes How to Clear Code Description Possible Cause Corrective Action Error Codes Improper start-up Restart , if still fault: reload Software error-error on start up or corrupted software or shutdown software Shorted temperature probe Probe failure.
  • Page 15: Cbs-2130xts -technical Data

    61lb 23”x 25” x 29” Dual-1 gallon 704mm 502mm 518mm 21.3kg 41.7kg 51.9 kg 22.1 l 28kg 584x635x737mm Dimensions, Utility Connections & Rough-in Drawings Rough-in CBS-2131XTS—Single station 3 liter airpot version Drawing#1201.00011.00 Rough-in CBS-2132XTS—Dual station 3 liter airpot version Drawing#1201.00012.00...
  • Page 16: Utility Requirements

    200°F (93°C) inside water tank (at sea level) CBS-2131XTS & 2132XTS—1 gal version Full Batch=1 gal 195°F (91°C) ± 5° at sprayhead Designs, materials, specifications, physical dimensions, firmware and software protocol for equipment or replacement parts are subject to review and change by FETCO without notice...
  • Page 17: Specifications-electrical And Output Configurations

    Specifications-Electrical and Output Configurations For qualified service technicians CBS-2130XTS 3 liters airpot version CBS_2131XTS—Single 3 liters airpot version Electrical Configurations Configuration Codes Heater Electrical Maximum Brew-Volume/Hour Voltage Phase Wires Plastic Stainless Steel Configuration Connection Amp Draw (3 liters per batch) Brewbasket Brewbasket E213153...
  • Page 18 CBS-2130XTS 3.8liters/1-gallon version CBS_2131XTS—Single 3.8 liters/1 gallon dispenser version Electrical Configurations Configuration Code Heater Electrical Maximum Brew-Volume/Hour Voltage Phase Wires Plastic Stainless Steel Configuration Connection Amp Draw (1 gallon per batch) Brewbasket Brewbasket E213152 E213152M 1 X 2.3 kW 100-120 NEMA 5-20P 19.7 5.8 gal/22 liters...
  • Page 19: Service Guide To A Successful Installation

    3. Verify voltages, polarity, circuits, and circuit breaker access before attaching equipment. 4. The electrical diagram is located in the Users Guide and online at www.fetco.com. 5. Make sure of the tight grounding of the equipment and use the external ground bolt.
  • Page 20: Installation Directions

    General: Utilize only qualified beverage equipment service technicians for installation. A Service Company Directory may be found on our web site, http://www.fetco.com. Water Connection 1. This equipment is to be installed to comply with the applicable federal, state, or local plumbing codes.
  • Page 21 (also termed PLUG-CAP 4. Most CBS-2131XTS equipment is factory equipped with a 120 V cord and plug. Some CBS-2131XTS and all CBS- 2132XTS have a terminal block for connecting the incoming power wires. Consult local codes to determine if a cord and plug can be installed on factory supplied terminal block equipment, or if the unit must be hard wired.
  • Page 22 Please see our website-www.fetco.com for the most up to date listings and additional parts and service information Designs, materials, specifications, physical dimensions, firmware and software protocol for equipment or replacement parts are subject to review and change by FETCO without notice...
  • Page 23: Parts Diagrams, North America

    Parts diagrams, North America 1102.00203.00 Spray Housing Assembly Parts CBS-2130XTS PART NO DESCRIPTION 1102.00020.00 SPRAY HOUSING ASSY CSD DESIGN 1024.00002.00 ORING, AS568A-019, BUNA-N 1102.00019.00 ASSEMBLY, CASCADE SPRAY DOME 1023.00189.00 ADAPTER, SPRAY HSG, DSV11 VALVE 1082.00068.00 SCREW, M3.9x13, CHEESE PH., T/FORM, Z/P 1057.00038.00 DIAPHRAGM, VALVE DSV-11 1057.00050.00...
  • Page 24 Drawing 1101.00153.00 CBS-2132 XTS 3 liter No Bypass...
  • Page 25 Drawing 1101.00153.00 CBS-2132 XTS 3 liter no bypass Ref# Part number Description 1111.00037.00 WELDMENT BODY, COMPLETE, CBS-2132 1024.00049.00 EDGE PROTECTOR, 7.00"LG, CBS-2130 1086.00004.00 BUSHING, SNAP, 1" MOUNTING HOLE 1024.00063.00 O-RING, 3 15/16" x 3/32" CS, DASH # 154, BUNA-N, DURO-A50 1102.00203.00 ASSEMBLY, SPRAY HOUSING, DSVP11 DESIGN 1083.00010.00...
  • Page 26 Drawing 1101.00150.00 CBS-2132 XTS 1 Gal...
  • Page 27 Drawing 1101.00150.00 CBS-2132 XTS 1 Gallon Ref# Qty Part number Description 1111.00037.00 WELDMENT BODY, COMPLETE, CBS-2132 1024.00049.00 EDGE PROTECTOR, 7.00"LG, CBS-2130 1086.00004.00 BUSHING, SNAP, 1" MOUNTING HOLE 1024.00063.00 O-RING, 3 15/16" x 3/32" CS, DASH # 154, BUNA-N, DURO-A50 1102.00203.00 ASSEMBLY, SPRAY HOUSING, DSVP11 DESIGN 1083.00010.00 WASHER, #10 SCREW W/NEOPRENE-BONDED SEAL...
  • Page 28 Drawing 1101.00152.00 CBS-2131XTS ASSEMBLY, 3 Liter...
  • Page 29 Drawing 1101.00152.00 CBS-2131XTS ASSEMBLY, 3 Liter Ref# Part number Description 1111.00036.00 WELDMENT BODY, COMPLETE, CBS-2131 1024.00049.00 EDGE PROTECTOR, 7.00"LG, CBS-2130 1086.00004.00 BUSHING, SNAP, 1" MOUNTING HOLE 1024.00063.00 O-RING, 3 15/16" x 3/32" CS, DASH # 154, BUNA-N, DURO-A50 1102.00203.00 ASSEMBLY, SPRAY HOUSING, DSVP11 DESIGN 1083.00010.00...
  • Page 30 Drawing 1101.00151.00 CBS-2131 120vac 1 gal...
  • Page 31 Drawing 1101.00151.00 ASSEMBLY, CBS-2131XTS, 1 GAL. Ref# Part number Description 1111.00036.00 WELDMENT BODY, COMPLETE, CBS-2131 1024.00049.00 EDGE PROTECTOR, 7.00"LG, CBS-2130 1086.00004.00 BUSHING, SNAP, 1" MOUNTING HOLE 1024.00063.00 O-RING, 3 15/16" x 3/32" CS, DASH # 154, BUNA-N, DURO-A50 1102.00203.00 ASSEMBLY, SPRAY HOUSING, DSVP11 DESIGN 1083.00010.00...
  • Page 32: Parts Diagrams, International Equipment

    Parts diagrams, International Equipment Drawing 1101.00189.00 EXPORT CBS-2131, CE 3kW/240VAC, 3L,...
  • Page 33 Drawing 1101.00189.00 CBS-2131, CE 3kW/240VAC, 3L, 1111.00036.00 WELDMENT BODY, COMPLETE, CBS-2131 1024.00049.00 EDGE PROTECTOR, 7.00"LG, CBS-2130 1086.00004.00 BUSHING, SNAP, 1" MOUNTING HOLE 1024.00063.00 O-RING, 3 15/16" x 3/32" CS, DASH # 154, BUNA-N, DURO-A50 1102.00203.00 ASSEMBLY, SPRAY HOUSING, DSVP11 DESIGN 1083.00010.00 WASHER, #10 SCREW W/NEOPRENE-BONDED SEAL 1084.00006.00...
  • Page 34 Drawing 1101.00190.00 CE EXPORT ASSS'Y., CBS-2131, 3kW/240VAC, 1 GAL.,...
  • Page 35 Drawing 1101.00190.00 CE ASSS'Y., CBS-2131, 3kW/240VAC, 1 GAL., 1 1111.00036.00 WELDMENT BODY, COMPLETE, CBS-2131 2 1024.00049.00 EDGE PROTECTOR, 7.00"LG, CBS-2130 1 1086.00004.00 BUSHING, SNAP, 1" MOUNTING HOLE 1 1024.00063.00 O-RING, 3 15/16" x 3/32" CS, DASH # 154, BUNA-N, DURO-A50 1 1102.00203.00 ASSEMBLY, SPRAY HOUSING, DSVP11 DESIGN 4 1083.00010.00...
  • Page 37 TANK ASSY, CBS-2132XTS Drawing 1104.00052.00 , 1104.00057.00 Ref# Part number Description 1114.00081.00 WELDMENT TANK CBS-2132XTS, GROMMET DESIGN 1024.00053.00 LEVEL AND TEMP PROBE GROMMET 1024.00062.00 GROMMET, SHORT, SILICONE, LEVEL AND TEMP PROBE 1024.00050.00 GROMMET, SILICONE, 11.4mm ID 1107.00019.00 HEATER ASSEMBLY, IMMERSION 2300W/120VAC 1107.00021.00 HEATER ASSEMBLY, IMMERSION 1500W/120VAC 1107.00022.00...
  • Page 38 Drawing 1104.00053.00 , covers 1104.00056.00 TANK ASSY, CBS-2131XTS Ref# Part number Description 1114.00080.00 WELDMENT TANK CBS-2131XTS, GROMMET DESIGN 1024.00053.00 LEVEL AND TEMP PROBE GROMMET 1024.00062.00 GROMMET, SHORT, SILICONE, LEVEL AND TEMP PROBE 1024.00050.00 GROMMET, SILICONE, 11.4mm ID 1107.00019.00 HEATER ASSEMBLY, IMMERSION 2300W/120VAC 1107.00021.00...
  • Page 39 BACK PANEL ASSEMBLY, CBS-2132XTS Drawing 1102.00208.00 Part Number Name 1112.00227.00 WELDMENT, BACK COVER CBS-2132 AND 2142 1052.00002.00 TERMINAL BLOCK, 3 POLE, W/ MARKING STRIP 1083.00011.00 WASHER, #8 SCREW SIZE, INTERNAL TOOTH LOCK 1083.00016.00 WASHER, #8 SCREW SIZE, FLAT 1086.00008.00 CONNECTOR, CABLE CLAMP, 3/4" 1058.00020.00 SWITCH, PWR ROCKER RED, ILLUM.
  • Page 40 BACK PANEL ASSEMBLY, CBS-2131XTS Drawing 1102.00209.00 Part Number Name 1112.00226.00 WELDMENT BACK COVER 2131 AND 2141 1052.00002.00 TERMINAL BLOCK, 3 POLE, W/ MARKING STRIP 1083.00011.00 WASHER, #8 SCREW SIZE, INTERNAL TOOTH LOCK 1083.00016.00 WASHER, #8 SCREW SIZE, FLAT 1086.00008.00 CONNECTOR, CABLE CLAMP, 3/4"...
  • Page 41 Drawing 1102.00218.00 ASSEMBLY, BACK PANEL, CBS-2132/42 CE # Part Number Name 1 1112.00245.00 WELDMENT, BACK COVER,CBS-2132, 2142 EU 1 1086.00031.00 BUSHING, STRAIN RELIEF, BLACK, .354"-.630" 1 1058.00024.00 SWITCH, POWER, DOUBLE POLE, 16A, 125/250 VAC 4 1083.00011.00 WASHER, #8 SCREW SIZE, INTERNAL TOOTH LOCK 4 1084.00006.00 NUT, 8-32 18-8 HEX MACHINE SCREW 1 1003.00170.00...
  • Page 42 Drawing 1102.00213.00 ASSEMBLY, BACK PANEL, CBS-2131/41, CE 1112.00236.00 WELDMENT BACK COVER, CBS-2131, 41 EU 1083.00011.00 WASHER, #8 SCREW SIZE, INTERNAL TOOTH LOCK 1084.00006.00 NUT, 8-32 18-8 HEX MACHINE SCREW 1058.00024.00 SWITCH, POWER, DOUBLE POLE, 16A, 125/250 VAC 1112.00246.00 WELDMENT BRACKET TERMINAL BLOCK, 3 POLE 1052.00022.00 EUROSTRIP HE6 TERM.
  • Page 44: Wiring Diagrams-north America

    Wiring Diagrams-North America...

This manual is also suitable for:

Cbs-2132xtsCbx-2132xts

Comments to this Manuals

Symbols: 0
Latest comments: