Using The Network Communication - Sanyo PJ-Net Organizer Plus POA-LN02 Owner's Manual

using the Network Communication

This Network Communication is to communicate by sharing the captured image of a com-
puter with multiple computers and a monitor. User can draw the text and figure on the
captured image by using a drawing tool.
The data that has the captured image of a Main PC and communication information is sent
to the monitor. The monitor displays this data onto the screen and serves this data to other
computers (Sub PC) at the same time. The Sub PC receives served capture data and dis-
plays it on the screen. The Main PC and Sub PC also can edit the captured image by using
the drawing tool. This edited image is applied to all the computers automatically.
PC1
* The Main PC is a computer which started using of communication function, and serves
own computer screen captured image to the Sub PC. The Main PC has an authority to
quit using whole of communication. To become the Main PC, execute the command
"Start Communication" or "Capture transfer". For further information, see item "How to
use the Network Communication". ( p.75)
* The Sub PC is a computer which receives a captured image from the Main PC. On the
communication mode, the Sub PC can become the Main PC anytime.
Capture
PC2
PC5
Using the Network Communication
MONITOR 1
PC6
Capture a screen
image of PC5 and
make marking with a
tool.
71
LD-NET ORGANIZER
OWNER'S MANUAL