Table of Contents
Advertisement
Chapter 4 Controlling the Monitor
Controls
Click Control on the main menu. The setting method differs depending on the contents
of the page. Click on the page number to change pages and select desired setting items.
Please see the instruction manual of the monitor to have the further information
of each control item.
input
This function is to select the input mode and source mode of the monitor. Click set but-
ton after selecting the input and source mode.
The control page displays valid control items depending on the selected input mode, signal ,
therefore, there may be different controls between the described items and actual control items
on the page display. For further information , refer to the monitor's owner's manual.
When the monitor is in standby, only the timer on the setting menu is effective; others are inactive.
item
Description
Input ....................... Selects input mode of the monitor.
AV 1
RGB
AV 2
AV 3
PC
DVI
NETWORK
Source ..................... Selects signal source of the input.
AV 2 : YPbPr/RGBHV
Advertisement
Table of Contents
