Sanyo PJ-Net Organizer Plus POA-LN02 Owner's Manual page 110

Chapter 7 Appendix
operation
Q
Why can't I change the controls in the setting page with web browser?
A
Please make sure the monitor is turned on. If it is in the standby mode, the setting is
not effective to the monitor. To control the monitor with a web browser, the moni-
tor must be in the powered-on condition. Also, monitors registered for multi-con-
trol cannot have any controls changed if they are in standby mode. But timer and
clock settings are always effective, even for monitors in standby mode.
Q
Why does it sometimes take a lot of time to complete the page display?
A
The display speed of the page depends on the network environment in which both
the monitor and computer are placed. It may take much time to complete the page
display if network traffic is heavy. Please consult your network administrator. You
can select the Light mode for displaying pages quickly ( p.30).
Q
I use many of the monitors in the network. How can I use names of the
monitors to recognize each monitor instead of IP addresses?
A
You can manage the monitors with nicknames instead of the IP address. Please see
item "Multi-control" for further information ( p.59).
By registering the monitor name and IP address with the DNS server, it can be
accessed with the nickname from the any computer referred to the DNS server.
Please consult your network administrator.
Q
How many numbers of the E-mail address can I register in the E-mail set-
ting page.
A
You can register up to 10 addresses.
110