Chapter 3 Basic Setting and Operation
[1]––––––––––––––––––––––––––––––––––
When power circuit is failed.
When internal temperature is too high.
When internal fan circuit is failed.
When Panel usage time reaches [ ] hours.
[2]––––––––––––––––––––––––––––––––––
When monitor is turned off.
When power save function turns Monitor off.
When the signal is interrupted.
When Auto Play is failed.
Up to 99,999 hours can be set for the time setting.
If condition "
hen Auto Play is failed" is checked, the trap is sent when occurring the error during the
W
auto display operation using with the network viewer function (
error, refer to item "Auto Display setting and control page [3]"(
Trap option
trap option setting
Tick check boxes in front of the condition item to send the
trap.
set
Click
button if you tick or un-tick the check box on a page.
p.92). For further information of the
p.95).