Table of Contents
Advertisement
Chapter 2 Installation
Flow of installation
The following are instructions for attaching this product to the monitor and connecting it
to the network. Please review the entire procedure to become familiar with it.
1
Function of the network unit ( p.17)
Explains the name and functions of each part of the network unit.
2
installation and network configuration ( p.18-25)
1
Mount this product onto the monitor.
2
Connect the LAN cable and join it to the network.
3
Configure the network of the network unit.
4
Set the Network PIN code.
3
installation of the software ( p.26-28)
Explains how to install the software Network Viewer & Capture 3 into your com-
puter.
The preparation is completed to control the monitor connected to the network. At next
step, set up and control the monitor via the network by using the web browser installed
on your computer. Please see chapter 3 "Basic setting and operation". ( p.29)
1
set up is complete
Advertisement
Table of Contents
