Handling
This chapter describes basic handling of the printer.
Installing and Replacing Roll Paper
Do not open the roll paper cover during printing or autocutting.
Do not touch the manual cutter with your hands when installing or replacing the
CAUTION
Use roll paper that meets the printer specification. For details about paper specification,
Paper must not be pasted to the roll paper spool.
1
Use the cover open lever to open the roll paper cover.
2
Remove the used roll paper core, if any.
The printer may be damaged.
roll paper.
Otherwise, you may be injured because the manual cutter blade is sharp.
see
"Paper Specifications" on page
27.
Cover open lever
Chapter 4 Handling
4
87