Epson TM-T82II Technical Reference Handbook page 55

Character code table default
Selectable from 43 pages including user defined page
Initial setting: Page 0 (PC437: USA, Standard Europe)
 For the character code table, see
 User-defined page is not supported by South Asia font models.
International character default
Selectable from 18 sets
Initial setting for Simplified Chinese models: China
Initial setting for ANK models, Traditional Chinese models, and South Asia font models: USA
Interface selection
• UIB
• Ethernet
• Built-in USB
*
• Auto (initial setting)
*
: The interface to which data is transmitted first is selected. Once the interface is selected, the
selection is enabled until the power is turned off or the printer is reset. This setting is valid for
models with UIB and built-in USB.
 Available settings may deffer depending on the model.
 For the model which USB Type B connector is covered with a plate, you need to select
[Built-in USB] in order to use the USB interface.
Power supply unit capacity
Selectable from levels 1 to 3 (Low  High)
Initial setting: level 3
Number of columns
• Standard mode (initial setting)
• 42 column mode
Autocutting after closing cover
• Cuts (initial setting)
• Does not cut
"" on page 99.
Chapter 2 Setup
2
55