Takara Belmont INOVA-EX Installation Instruction page 2

INOVA-EX
4
Attach the step.
BB-IVFW :
Raise the legrest.
Insert the nuts of the step (back side) to the holes for nut of mounting plate.
Adjust the adjuster on the back side of step.
Mounting Plate
Guide Knob
BB-IVFW, IVFS, IVFT :
Insert the screw of the step (back side) to the holes of mounting plate.
Fix the step with three nuts (M6).
Adjust the adjuster on the back side of step.
Warning
Care must be taken when extending the adjuster so that it will not touch the
Caution
power cord when the chair is rotated.
Installation Instruction
Legrest
Hole for Nut
Screw
Step Mounting Pltae
Nut (M6)
The adjuster is on the back side
After mounting the step, make sure that the mounting hardware is securely
engaged in the guide, the nuts are inserted to the holes, and there is no
wobble in the step. If there is any wobble, the step may not be stable when
your customers step up to or step down from the step. Also, when raising the
legrest, it may rub against the upper side of the step.
Make sure that the legrest is raised when mounting or detaching the step.
Care must be taken when carrying or placing the step since it is very heavy.
Falling accident may result in severe injury.
Step
Nut
Step Bracket
The adjuster is on the back side
Step
Nut (M10)
Loosen
Fasten
Adjuster
Extend
Shorten
Nut(M10)
Loosen
Fasten
Adjuster
Extend
Shorten
BOOK NO. 1E02NHA0