tams elektronik S88-4 Manual page 4

English
Checking the package contents
Please make sure that your package contains:

one kit, containing the components listed in the parts list
( page 15) and one PCB or

one ready-built module or

one ready-built module in a housing (complete unit),

an Ethernet patch cable with RJ-45 connectors (length: 0.5 m)

a CD (containing the manual and further information).
Required materials
For assembling the kit you need:

an electronic soldering iron (max. 30 Watt) or a regulated soldering
iron with a fine tip and a soldering iron stand,

a tip-cleaning sponge,

a heat-resistant mat,

a small side cutter and wire stripper,

as necessary a pair of tweezers and long nose pliers,

electronic tin solder (0.5 mm diameter).
In order to connect the module to the rails you need wire.
Recommended diameter: > 0.25 mm².
For the connection of the module to a device with a 6-pole s88
connector you need:

an adapter S88-A (depending on the installation situation item no.
44-09100, 44-09110, 44-09200 or 44-09210).
Page 4
S88-4