Assembling The Kit - tams elektronik S88-4 Manual

English

6. Assembling the kit

You can skip this part if you have purchased a ready-built module or device.
Preparation
Put the sorted components in front of you on your workbench.
The separate electronic components have the following special features
you should take into account in assembling:
Resistors
Resistors reduce current.
The value of resistors for smaller power ratings is indicated
through colour rings. Every colour stands for another
figure. Carbon film resistors have 4 colour rings. The 4th
ring (given in brackets here) indicates the tolerance of the
resistor (gold = 5 %).
Value: Colour rings:
220  red - red - brown (gold)
1 k brown - black - red (gold)
4,7 k yellow - violet - red (gold)
15 k brown - green - orange (gold)
100 k brown - black - yellow (gold)
Resistance networks
In
integrated. The number of the integrated resistors varies
depending on the design. One side of the resistors is
commonly taken out of the network, the other side
seperately for every resistor.
Page 12
resistance networks there are several
S88-4
resistors