Selecting Surround Mode - Sanyo DWM-2500 Instruction Manual

Selecting Surround Mode

Press [SURROUND] to select the surround mode.
Each time the button is pressed, the surround mode changes as follows:
AUTO v QS 5.1 ST v QS 5.1 MN v 2.1ch v AUTO...
Function FL display
DVD/CD AUTO
QS 5.1 ST
QS 5.1 MN
2.1ch
AUTO
VIDEO 1
VIDEO 2
FM TUNER
QS 5.1 ST
AM TUNER
QS 5.1 MN
2.1ch
When headphones are connected while any of the surround modes are selected, the surround mode changes as follows:
AUTO HP v QS HP ST v QS HP MN v 2ch HP v AUTO HP...
Function FL display
DVD/CD
AUTO HP
VIDEO 1
QS HP ST
VIDEO 2
QS HP MN
FM TUNER
AM TUNER
2ch HP
Notes:
• DVD video discs with DTS may not work correctly. You can see the picture on the TV screen, but there is no sound.
In this case, press the AUDIO button repeatedly while holding the SHIFT button down to select Dolby Digital sound. (See page E24.)
• When receiving weak FM broadcasts, set the mode to "2.1ch". The sound quality may improve.
Description
The unit selects the surround mode automatically depending on the disc.
• If a DVD disc is encoded with Dolby Digital, "s D" appears on the FL display, and it is played
back with Dolby Digital 5.1 channel surround sound.
Not all DVD discs are encoded with Dolby Digital 5.1 channel surround sound.
• If a DVD disc is encoded with Dolby Surround, "s D" and "s PL" appear on the FL display at
the same time. The surround mode is set to Dolby Pro Logic mode.
• Audio CD, MP3 and WMA discs are played back with Q-Surround 5.1 channel surround sound.
Disc is played back with Q-Surround 5.1 channel surround sound.
For 2-channel source, it uses Virtual 5.1 channel surround sound.
When using a monaural source, select this mode. It uses Virtual 5.1 channel surround sound.
The surround mode is set to 2.1 channel (Front left and right speakers, and Subwoofer).
The surround mode is set to Q-Surround 5.1 channel surround sound.
The surround mode is set to Q-Surround 5.1 channel surround sound.
For 2-channel source, it uses Virtual 5.1 channel surround sound.
When using a monaural source, select this mode. It uses Virtual 5.1 channel surround sound.
The surround mode is set to 2.1 channel (Front left and right speakers, and Subwoofer).
Description
Q-Surround effect.
Surround effect when monaural program material used.
Normal 2-channel sound.
-E13-
SURROUND
Need help? Call
1-800-813-3435