Table of Contents
Advertisement
Preparations
•
Turn on the TV and select the video input source.
V I D E O
To use the remote control for TV
Note:
You must set the remote control code for TV first. (See Page
E6.)
1. Press [TV POWER] to turn on the power.
•
When using the remote control, the Transmitter
Window on the remote control must be pointed toward
your TV.
2. Press [TV/VIDEO] to select the video input source.
3. Set the TV volume minimum.
Notes:
•
Only remote-controlled TVs can be operated using this
remote control. (Refer to your TV instruction manual for
more details.)
•
There may be some TV models that cannot be operated
with this remote control. If this is the case, use the
original remote control supplied with the TV.
•
Select the playback picture size according to the aspect ratio
of the TV. (See "Setting Display" in "INITIAL SETTINGS" on
Page E32.)
4:3 LB
4:3 PS
(Letterbox):
(Panscan):
Important Note:
•
This instruction manual explains the basic instruction of this
unit using the remote control unit.
•
Some DVD video discs have different functions that may
not be explained in this instruction manual. You may need
extra instructions. In this case, please follow the instructions
displayed on the TV screen or jacket or case of the disc.
•
"
" may appear on the TV screen during operation. This
icon means that the function is not available on the disc
now.
•
For improvement, on-screen displays subject to change
without notice.
DISC PLAYBACK
1
TV
16:9
-E16-
Basic Playback
Notes:
•
Do not touch the disc tray while it is moving.
•
Never place anything except a disc on the disc tray. Foreign
objects can damage the unit.
•
Do not apply excessive force to the disc tray.
•
Discs must be placed on the disc tray one at a time.
When operation buttons are pressed, that operation is displayed
on the TV screen. The display disappears after several seconds.
2
1, 3
1. Press [q] on the unit (or [OPEN/CLOSE] on the remote
control).
•
"OPEN" appears on the FL display and the disc tray
opens.
•
"SANYO" logo appears on the TV screen.
Note:
To open close the disc tray, be sure to use [q] (or [OPEN/
CLOSE]. Do not press the disc tray with your hand.
2. Place the disc with the label facing up on the disc tray.
For 5-inch (12cm) disc
3. Press [q] (or [OPEN/CLOSE]) again.
•
The disc tray closes.
•
"READING" appears on the FL display.
Note:
Some discs may start playback automatically.
1, 3
or
For 3-inch (8cm) disc
Hide quick links:
Advertisement
Table of Contents
