Chapter 1 Overview; Chapter 2 Preparing To Rack Mount The 1125 Appliance - Cisco Physical Access 1125 Appliance User Manual

Preface
This guide provides hardware descriptions and installation instructions for the Cisco Physical Access
1125 Appliance installed with Cisco PAM Release 1.0.0 and 1.1.0. For installations of Cisco PAM
Release 1.2.0 or higher, see the Cisco Physical Security Multi Services Platform User Guide.
This document includes the following information:
•
•
•
•
•
Note For instructions to configure the Cisco PAM server software included with the appliance, see the
Physical Access Manager User
This preface includes the following additional information:
•
•
•
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional
information, see the monthly What's New in Cisco Product Documentation, which also lists all new and
revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed
and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free
service and Cisco currently supports RSS version 2.0.
OL-20929-01
Chapter 1, "Overview."
Chapter 2, "Preparing to Rack Mount the 1125 Appliance."
Chapter 3, "Rack Mounting the Cisco PAM 1125 Appliance."
Appendix A "Hardware Specifications."
Appendix B "Troubleshooting."
Obtaining Documentation and Submitting a Service Request, page iii
Safety Warnings, page iv
Safety Guidelines, page vi
Guide.
Cisco Physical Access 1125 Appliance User Guide
Cisco
iii