Storage And Handling - Rhopoint Optimap PSD Operating Instructions Manual

This instrument contains precision optics and electronics. You should
•
therefore avoid knocking or dropping the device as the resulting impact could
cause serious damage.
In some circumstances the optical components in the instrument could
•
become misted as a consequence of temperature change. It is recommended
that the instrument is not used until it has stabilised to ambient temperature.
Ensure that the instrument is not exposed to moisture, chemicals or to any
•
corrosive vapours.
Do not hold the instrument by the measurement aperture, no objects should
•
be placed inside the aperture as damage to the measuring system may occur.
The instrument housing and sample area locator are resistant to a variety of
•
solvents however it is not possible to guarantee resistance to all chemicals,
therefore the surfaces of the instrument should only be cleaned using a soft,
moist cloth.
Prevent exposure of the instrument to direct sunlight for prolonged periods
•
and to continuous humidity and condensation.

Storage and Handling

3