Emc, Emi, And Esd Compliance; Equipment Safety Standard Compliance; Table 3 Safety Labels - Nokia Gateway 3 Product Manual

Nokia WiFi Gateway 3 Product Guide
3.2.1
3.2.2
Issue: 01

EMC, EMI, and ESD compliance

The customer premises equipment complies with the following EMC, EMI, and ESD
requirements:
•
EN 300-386 V1.6.1: Electromagnetic Compatibility and Radio Spectrum Matters
(ERM): Telecommunications Network Equipment; Electromagnetic Compatibility
(EMC) requirements; Electrostatic Discharge (ESD) requirements
•
EN 301489-1: Electromagnetic Compatibility and Radio Spectrum Matters (ERM):
Telecommunications Network Equipment; Electromagnetic Compatibility (EMC)
Standard for Radio Equipment and Servcies; part 1: Common Technical
Requirements
•
EN 301489-17: Electromagnetic Compatibility and Radio Spectrum Matters
(ERM); Electromagnetic Compatibility (EMC) Standard for Radio Equipment; Part
17: Specific Conditions for Broadband Data Transmission Systems.
•
Radio Equipment Directive (RED) 2014/53/EU (applicable from 13 June 2016)
•
EN 55032 (2015): Electromagnetic compatibility of multimedia equipment -
Emission Requirements
•
EN 55024 (2010): Information Technology Equipment, Immunity Characteristics,
limits and methods of measurement
•
Electromagnetic Compatibility (EMC) directive 2014/30/EU
•
European Council Directive 2004/108/EC
•
Low Voltage (LVD) directive 2014/35/EC

Equipment safety standard compliance

The customer premises equipment is labeled with specific safety compliance
information and instructions that are related to a variant of the CPE. Observe the
instructions on the safety labels.
Table 3 provides examples of the text in the various CPE safety labels.
Table 3 Safety labels
Label text
TUV compliance
ESD warning
CDRH compliance
CE marking
Figure 2 shows a sample safety label located on the bottom of the Gateway 3
(G-240W-E).
3FE-47464-AAAA-TCZZA
Description
Type 3R enclosure - Rainproof.
Caution: This assembly contains electrostatic sensitive device.
Complies with 21 CFR 1040.10 and 1040.11.
There are various CE symbols for CE compliance.
ETSI CPE safety guidelines
25