Nokia Gateway 3 Product Manual page 77

Nokia WiFi Gateway 3 Product Guide
Issue: 01
Field
Enable/Disable
NAT
Service
Enable VLAN
VLAN ID
VLAN PRI
WAN IP Mode
Connection Trigger
Username
Password
Keep Alive Time
Keep Alive Retry
Echo Value
Manual DNS
(2 of 2)
2 Configure a specific WAN connection.
3 Click Save.
4 STOP. This procedure is complete.
3FE-47464-AAAA-TCZZA
Description
Select this checkbox to enable the WAN connection
Select this checkbox to enable NAT
Select the checkboxes to enable service types for this connection
Select this checkbox to enable VLAN
Enter the VLAN ID
Enter the VLAN PRI
Choose an IP mode from the drop-down menu
Choose the trigger type from the drop-down menu
Enter the Username provided by your ISP
Enter the Password provided by your ISP
Enter the keep alive time (5 to 60 seconds)
Enter the number of keep alive time retries (1 to 10 times)
The echo value: the keep alive time value multiplied by the number of retries
Enter a DNS
Configure a Gateway 3 (G-240W-E)
77