Security Configuration - Nokia Gateway 3 Product Manual

Nokia WiFi Gateway 3 Product Guide
8.1.4
Issue: 01
Field Description
Interface Choose an interface from the drop-down menu
DSCP Remark Enter the value for the DSCP mark (range: 0-63); valid only for L3 Criteria
802.1p Mark Enter the value for the 802.1p (range: 0-7)
Forwarding Policy Enter the number for the forwarding policy (range: 1-7)
Additional fields for L3
Protocol Choose a protocol from the drop-down menu, or select the Exclude check box
Application Choose an application from the drop-down menu
Source IP and Enter the values for the source IP and IP mask, or select the Exclude check box
Source IP Mask
Destination IP and Enter the values for the destination IP and IP mask, or select the Exclude check box
Destination IP Mask
Source Port and Enter the values for the source port and port max (highest port number) or select the
Source Port Max Exclude check box
Destination Port and Enter the values for the destination port and port max (highest port number), or select
Destination Port Max the Exclude check box
(2 of 2)
2 Choose a QoS type from the drop-down menu: L2 or L3.
3 Configure a QoS policy.
4 Click Add to add a QoS policy.
5 STOP. This procedure is complete.

Security configuration

The Gateway 3 (G-240W-E) also supports security configuration, including:
•
Firewall
•
MAC Filter
•
IP Filter
•
URL Filter
•
Parental Control
•
DMZ and ALG
•
Access Control
3FE-47464-AAAA-TCZZA
Configure a Gateway 3 (G-240W-E)
91