Acoustic Noise Emission Standard Compliance; Electrical Safety Guidelines; Power Supplies; Cabling - Nokia Gateway 3 Product Manual

Nokia WiFi Gateway 3 Product Guide
3.2.5

3.3 Electrical safety guidelines

3.3.1
3.3.2
Issue: 01

Acoustic noise emission standard compliance

The customer premises equipment complies with EN 300 753 acoustic noise
emission limit and test methods.
This section provides the electrical safety guidelines for the customer premises
equipment.
Note 1 —
Code. However, local electrical authorities have jurisdiction
when there are differences between the local and U.S.
standards.
Note 2 —

Power supplies

The use of any non-Nokia approved power supplies or power adapters is not
supported or endorsed by Nokia. Such use will void any warranty or support contract
with Nokia. Such use greatly increases the danger of damage to equipment or
property.

Cabling

The following are the guidelines regarding cables used for the customer premises
equipment:
•
All cables must be approved by the relevant national electrical code.
3FE-47464-AAAA-TCZZA
The devices comply with the U.S. National Electrical
The devices comply with BS EN 61140.
ETSI CPE safety guidelines
27