Light-Measuring Mode Setting - Sanyo Xacti VPC-J1 Instruction Manual

LIGHT-MEASURING MODE SETTING

You can select from 3 types of light-measuring modes.
Multi-section light-measuring: Light is measured by sampling from multiple
Center-weighted light-measuring: Light is measured from the entire shooting
Spot light-measuring: You can compose the picture and capture the image
1
Display an EXPERT Mode Shooting
Setting Screen (see page 94).
2
Select the desired light-measuring
mode from the light-measuring
mode (EXP MEASURE) menu.
V: Multi-section light-measuring
X: Center light-measuring
W: Spot light-measuring
3
Press the SET button.
œ This completes the light-measuring
mode setting.
œ When spot light-measuring is
selected, the light-measuring spot
mark K appears in the center of
the LCD monitor.
105
English
areas of the entire shooting screen.
screen, but gives more importance to the
values near the center.
after first measuring the light only at the center spot of
the LCD monitor.
Light-measuring spot mark