Zoom Settings - Sanyo Xacti VPC-J1 Instruction Manual

ZOOM SETTINGS

Setting the optical zoom (video clip shooting
only)
The optical zoom can be used during video clip photography, but the noise
from the zoom movement may be picked up by the microphone and be
audible during playback. If you are bothered by this noise, you can disable
the optical zoom.
1
Set the camera to the video clip
shooting mode (see page 41), and
display the EXPERT Mode Shooting
Setting Screen (see page 94).
2
Select the desired optical zoom
shooting setting from the optical
zoom menu.
ñ: Optical zoom is disabled during
video clip recording.
T: Optical zoom is enabled during
video clip recording.
3
Press the SET button.
œ This completes the optical zoom
setting.
HINT
œ Even when the optical zoom setting is set to ñ, the zoom can be still
operated whenever the camera is not recording. This means that you an
use the zoom switch to compose the picture before actually beginning
recording.
109
English