Light-Measuring Mode Setting" - Sanyo VPC-E6EX Xacti Instruction Manual

LIGHT-MEASURING MODE SETTING
You can select from 3 types of light-measuring modes.
Multi-section light-measuring:
The exposure is adjusted after sampling from multiple areas of the entire
shooting screen.
Center-weighted light-measuring:
The exposure is adjusted after light is measured from the entire image, but
with emphasis on the center area.
Spot light-measuring:
You can compose the picture and capture the image after first measuring the
light only at the center spot of the LCD monitor.
1
Display the Shooting Setting Screen (page 53).
2
Select the light-measuring mode (EXP MEASURE) menu.
h The light-measuring mode menu appears.
n: Multi-section light-measuring
W: Center light-measuring
Y: Spot light-measuring
3
Select the desired icon, and press
the SET button.
h This completes the light-measuring
mode setting.
h When spot light-measuring is
selected, the light-measuring spot
mark
the LCD monitor.
Downloaded From camera-usermanual.com Sanyo Manuals
77
English
appears in the center of
Spot mark