Light-Measuring Mode Setting - Sanyo Xacti VPC-HD700 Instruction Manual

LIGHT-MEASURING MODE SETTING

You can select from 3 types of light-measuring modes.
Multi-section light-measuring:
The light is modulated after sampling from multiple areas of the entire
shooting screen.
Center-weighted light-measuring:
The light is modulated for the entire image after measuring from mostly the
center area.
Spot light-measuring:
You can compose the picture and capture the image after first modulating the
light only at the center spot of the monitor.
1
Display the NORMAL Mode Shooting Menu (page 48), select "EXP
MEASURE", and press the SET button.
n: Multi-section light-measuring
W: Center-weighted light-measuring
Y: Spot light-measuring
2
Select the desired light-
measuring mode, and press the
SET button.
h This completes the light-
measuring mode setting.
h When spot light-measuring is
selected, the light-measuring
spot mark
center of the monitor.
109
English
appears in the
40
F3.5
1/30
Light-measuring spot mark
HD-SHQ
00:02:47