Table of Contents
Advertisement
Quick Links
Congratulations on your purchase of our SUNJOY Heirloom Tete-a-Tete. Our clear, easy to
follow, step-by-step instructions will guide you through the assembly process from start
to finish.
WARNING:
z
Read and follow all Warnings & Assembly Instructions before attempting to assemble.
z
Keep children away from assembly area. Children and pets should be supervised when they
are in the area of construction
z
Begin assembly not less than 6 feet from any obstruction such as a fence, garage, house,
overhanging branches, laundry line, or electrical wires.
z
Some parts may contain sharp edges. Wear protective gloves as necessary.
z
For outdoor use only.
z
Install on level ground. Check all bolts for tightness before and during
usage.
Please take time to read these instructions thoroughly and follow each step carefully for safe and
easy operation. Keep this manual for future reference.
For technical assistance on assembly or replacement parts, call Sunjoy Industries at 1-866-578-6569
from 8:30AM to 5:30PM EST, or email us at sams@sunjoygroup.com, or visit
for assistance.
Heirloom Tete-a-Tete
Item# L-DN1159SAL
IMPORTANT
www.sunjoydirect.com
Advertisement
Table of Contents
Related Manuals for Sunjoy Heirloom Tete-a-Tete
Summary of Contents for Sunjoy Heirloom Tete-a-Tete
- Page 1 Heirloom Tete-a-Tete Item# L-DN1159SAL Congratulations on your purchase of our SUNJOY Heirloom Tete-a-Tete. Our clear, easy to follow, step-by-step instructions will guide you through the assembly process from start to finish. WARNING: Read and follow all Warnings & Assembly Instructions before attempting to assemble.
- Page 2 Parts List Description Armrest 1 Armrest 2 Leg 1 Leg 2 Chair Body Table Top Shelf Connecting Support Bar 1 Connecting Support Bar 2 Seat Cushion Back Cushion Steel Spring Plate Pre-assembled on I Bolt M6x20 Spring Washer M6 Flat Washer M6 Bolt M6x35 Big Washer 25x50x3 8pcs Pre-assembled...
- Page 3 Step 1: Insert Bolt (DD) through Spring Step 2: Insert Bolt (AA) through Spring Washer (BB), Flat Washer (CC) and Shelf Washer (BB), Flat Washer (CC), and Leg (G), then lock to Leg 1&2 (C&D) by Hex Key 1&2 (C&D), then lock to Table Top (F) by (KK).
- Page 4 Step 4: Insert Bolt (FF) through Big Washer (EE), Chair Body (E), Connecting Support Bar 2 (I), Big Washer (EE), Flat Washer (JJ) and Spring Washer (II), then lock it with Nut (HH) by Wrench (LL). Tighten all the hardware. Step 5: Put Seat Cushion (J) on Chair Body (E).
- Page 5 877-738-7325 to obtain it from V-SEAL Sealers. Limited Warranty: Sunjoy Industries warrants to the original purchaser that this item is free from defects in workmanship and materials for a period of 1 year from the date of purchase, provided the item was factory-sealed at the time of purchase and is maintained with care and used only for personal, residential purposes.
Need help?
Do you have a question about the Heirloom Tete-a-Tete and is the answer not in the manual?
Questions and answers