Technical Data; Commissioning & Handover; Operation - Stanley Argon Built In ARBI100 Installation And Operating Instructions Manual

Note: Dimensions stated are in millimetres unless otherwise stated and may be subject to a slight +/- variation.
Voltage
Max Power
No Heater
Motor Heater
Gross Weight (kgs):
Efficiency Rating:
On completion of the installation:
* Ensure that the operating instructions for the unit are left with the customer.
* Ensure to advise the customer on the correct use of the appliance and how to isolate the
unit when required.
* Advise the user what to do should smoke or fumes be emitted from the unit.
The unit can be operated either by the switches located on the left top inner face of the unit or using the remote
control supplied.
NOTE: The unit may emit a slight, harmless odour and smoke when first used. This odour & smoke is normal
and it is caused by the internal heating of the internal heater parts and will not occur again
ARBI130

TECHNICAL DATA

ARBI100
40
A
COMMISSIONING AND HANDOVER

OPERATION

7
240V AC 50-60 Hz
2000W
25W
19W
Fig 6
ARBI130
48
A