Removing A Card - Sanyo VPC SX 550 Instruction Manual

Removing a Card

1
Set the main switch to "MONITOR OFF" or
"CAMERA."
2
Close the lens cover.
3
Make sure the accessing indicator is not flashing,
then open the card slot cover on the bottom of
the digital camera.
œ If the accessing indicator is lit or flashing, then the
digital camera is writing to the card. Never remove
the card at this time.
4
Stand up the eject button.
5
Push in the eject button and remove the card.
6
Close the card slot cover.
NOTE
œ By using the card together with a commercially available PC card adaptor for CompactFlash
cards, the card can be used as a PC card conforming to PC Card Standard-ATA.
PLAY CAMERA
MONITOR OFF
Main switch
Card slot cover
Accessing indicator
Eject button
English
26