Video Input; Selecting Input Source - Sanyo PLC-XP55L Owner's Manual

VIDEO INPUT

When connecting to those equipment, select a type of Video
source in SOURCE SELECT Menu.
1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button to move a red frame pointer to
INPUT Menu icon.
2 Press POINT UP/DOWN button to move a red arrow pointer to
Input 2 and then press SELECT button. Source Select Menu will
appear.
3 Move a pointer to source that you want to select and then press
SELECT button.
When video input signal is connected to VIDEO jack,
Video
select Video.
When video input signal is connected to Y-Pb/Cb-
Y,Pb/Cb,Pr/Cr
Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.
When connecting to those equipment, select a type of Video
source in SOURCE SELECT (VIDEO) Menu.
1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button to move a red frame pointer to
INPUT Menu icon.
2 Press POINT UP/DOWN button to move a red arrow pointer to
Input 3 and then press SELECT button. Source Select Menu will
appear.
3 Move a pointer to source that you want to select and then press
SELECT button.
When video input signal is connected to VIDEO jack,
Video
select Video.
When video input signal is connected to Y-Pb/Cb-
Y,Pb/Cb,Pr/Cr
Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.
When video input signal is connected to S-VIDEO jack,
S-Video
select S-Video.
30

SELECTING INPUT SOURCE

WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )
WHEN SELECT INPUT 3 (AV TERMINALS )
INPUT MENU
INPUT Menu icon
Move a pointer (red arrow) to
Input 2 and press SELECT
button.
Input 2
Source Select Menu
Move a pointer to Video or
Y, Pb/Cb, Pr/Cr and press
SELECT button.
INPUT MENU
INPUT Menu icon
Move a pointer (red arrow) to
Input 3 and press SELECT
button.
Input 3
Source Select Menu (VIDEO)
Move a pointer to source
and press SELECT button.