Sanyo PLC-XP45 Service Manual
  1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Projector
  5. PLC-XP45
  6. Service manual
Sanyo PLC-XP45 Service Manual

Sanyo PLC-XP45 Service Manual

Hide thumbs Also See for PLC-XP45:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual

SERVICE MANUAL

PRODUCT CODE
1 122 108 00
(MA8A)
1 122 109 00
(PA8A)
1 122 109 02
(PA8C)
1 122 110 00
(MB8A)
1 122 111 00
(PB8A)
1 122 111 02
(PB8C)
Multimedia Projector
PLC-XP45
FILE NO.
Model No. PLC-XP45
Original Version
Chassis No. MA8-XP4500
MB8-XP4000
NOTE: Match the Chassis No. on the unit's
back cover with the Chassis No. in the
Service Manual.
If the Original Version Service
Manual Chassis No. does not match
the
unit's,
additional
Literature is required.You must refer to
"Notices" to the Original Service
Manual prior to servicing the unit.
REFERENCE NO.
PLC-XP40
U.S.A., Canada,
Europe, Asia, Africa
U.K
PLC-XP40
Service
SM
5110261

Advertisement

Table of Contents
loading

Related Manuals for Sanyo PLC-XP45

Summary of Contents for Sanyo PLC-XP45

  • Page 1: Service Manual

    FILE NO. SERVICE MANUAL Multimedia Projector Model No. PLC-XP45 PLC-XP40 U.S.A., Canada, Europe, Asia, Africa Original Version PLC-XP40 PLC-XP45 Chassis No. MA8-XP4500 MB8-XP4000 NOTE: Match the Chassis No. on the unit’s back cover with the Chassis No. in the Service Manual.

  • Page 2: Table Of Contents

    ■ Contents ■ Safety instructions ________________________________________________3 ■ Specifications __________________________________________________ 4 ■ Note on Servicing ______________________________________________ 5 ■ Adjustments after parts replacement ________________________________ 5 ■ Circuit protections ______________________________________________ 6-7 ● Fuse ____________________________________________________ 6 ● Thermal switch ____________________________________________ 6 ● Interlock switch ____________________________________________ 6 ●...

  • Page 3: Safety Instructions

    ■ Safety Instructions SAFETY PRECAUTIONS WARNING: The chassis of this projector is isolated (COLD) from AC line by using the converter transformer. Primary side of the converter and lamp power supply unit circuit is connected to the AC line and it is hot, which hot circuit is iden- tified with the line ( ) in the schematic diagram.

  • Page 4: Specifications

    Horizontal Resolution 800 TV lines (HDTV) Projection Lens F 1.7 ~2.0 lens with f=48.2mm ~ 62.6mm with motor zoom and focus (PLC-XP45) F 1.8 ~2.1 lens with f=48.4mm ~ 62.8mm with motor zoom and focus (PLC-XP40) Throw Distance 4.6’ ~ 48.3’ (1.4m ~ 14.7m) (PLC-XP45), 4.6’ ~ 47.3’ (1.4m ~ 14.4m) (PLC-XP40)

  • Page 5: Note On Servicing

    ■ Adjustments after Parts Replacement ● ❍ : Adjustment necessary : Check necessary Disassembly / Replaced Parts LCD/ Polarized glass Condenser Relay Power Sub Power Prism Main Board Lens Lens Board Board Ass’y ❍ ● Condenser lens adjustment ❍ ● Relay lens adjustment Contrast Adjustment ●...

  • Page 6: Circuit Protections

    ■ Circuit Protections This projector is equipped with the following circuit protections to operate in safety. If the abnormality occurs inside the projector, it will automatically turn off by operating one of the following protection circuits. ● Fuse The fuse is located inside of the projector. When either the LAMP indicator or the READY indicator is not illuminated, fuse may be opened.

  • Page 7: Warning Temperature And Power Failure Protection

    Circuit Protections ● Warning temperature and power failure protection The TEMP WARNING indicator flashes red and the projector will automatically turn off when the internal tempera- ture of the projector exceeds the normal temperature or when stopping cooling fans or when the internal power supply lines are failed.

  • Page 8: Mechanical Disassemblies

    ■ Mechanical Disassemblies Mechanical disassemble should be made following procedures in numerical order. Following steps show the basic procedures, therefore unnecessary step may be ignored. Caution: The parts and screws should be placed exactly the same position as the original otherwise it may cause loss of performance and product safety.
  • Page 9 Mechanical Disassemblies Main Board removal Remove 7 screws to take the Main Board upward. Main Board Fig.3 AV Board & Rear Panel removal FN905 Remove 2 screws and take the Rear Panel ass’y upward off. Remove 4 screws to take the fan (FN905) off. Remove 5 screws and 1 screw to take AV Board...
  • Page 10 Mechanical Disassemblies Lamp Ballast Unit removal Ballast Cover Remove 4 screws to take the Ballast Cover upward FN903 off. Remove 2 screws to take the Fan (FN903) off. Remove the Sub Power Board and Drive Board by pulling them upward. Sub Power Board Ballast Board...
  • Page 11 Mechanical Disassemblies Prism Base removal Remove 2 screws to take the Prism Base ass’y upward off. Remove 2 screws to take the Lens Shift Motor and Sensor SW Holder from the Base. Prism Base Ass’y Motor and Sensor Holder Fig.7 Power Board removal Remove 3 screws to take the Power Board off.

  • Page 12: Mechanical Disassemblies

    Mechanical Disassemblies Line Filter Board & Interlock SW & Thermal SW removal Remove 1 screw to take Interlock Switch(SW905). Remove 2 screws to take Filter Board Holder and remove 2 screws to take Filter Board from the Holder. Remove 1 screw to take Thermal Switch(SW902).

  • Page 13: Optical Parts Disassemblies

    ■ Optical Parts Disassemblies Before taking this procedure, remove Cabinet Top and Main Board following to the “Mechanical Disassemblies”. Disassembly requires a 2.0mm or 2.5mm hex wrench and a slot screwdriver. Projection Lens removal Remove Cabinet Front-Top following to the chapter “Mechanical Disassemblies”.
  • Page 14 Optical Pats Disassemblies Relay Lens disassembly Remove 2 hex screws and pull the Relay Lens ass’y upward. Remove 2 screws to take the Lens off from the holder. Note: There is no mounting direction of the lens. Holder Relay Lens Fig.3- Fig.3- Polarized Glass-Out removal...
  • Page 15 Optical Parts Disassemblies Optical Unit Top removal Remove 7 screws to take the Optical Unit Top off upward. Fig.5 Condenser Lens disassembly Remove 2 hex screws and take the Condenser Lens ass’y. Release 4 hooks to take the Lens off from the holder. * Should be placed the lens as the flat surface side comes to the...

  • Page 16: Optical Parts Disassemblies

    Optical Parts Disassemblies Locations and Directions Key No. Description When the optical parts in the optical unit mounting or assembling, the Condenser lens (R) parts must be mounted in the specified location and direction as Condenser lens shown in figure below. Condenser lens Mirror (B) Optical filter (UV cut)

  • Page 17: Lcd Panel/Prism Ass'y Replacement

    ■ LCD Panel/Prism Ass’y Replacement IMPORTANT NOTICE on LCD Panel/Prism Ass'y Replacement LCD panels used for this model can not be replaced separately. Do not disassemble the LCD Panel/Prism Ass’y. These LCD panels are installed with precision at the factory. When replacing the LCD panel, should be replaced whole of the LCD panels and prism ass’y at once.

  • Page 18: Lamp Replacement

    ■ Lamp Replacement WARNING: ORDER REPLACEMENT LAMP - For continued safety, replace with a lamp assembly of the same type. Type No. Service Parts No. - Allow the projector to cool for at least 45 minutes before you open the POA-LMP38 610 293 5868 lamp cover.

  • Page 19: Optical Adjustments

    ■ Optical Adjustments Before taking optical adjustments below, remove the Cabinet Top and Main Board following to the “Mechanical Disassemblies” Adjustments require a 2.0mm hex wrench and a slot screwdriver. Note: Do not disconnect connectors K8L, K8X, K8D, K8G and K8E on the main board, because the projector can not turn on due to operate the power failure protection.

  • Page 20: Condenser Adjustment

    Optical Adjustments Condenser Lens adjustment Turn the projector on by a state of without FPC cables. Adjust the adjustment base of condenser lens ass’y to make color uniformity in white. 1) If the shading appears on the left or right of the screen as White shown in Fig.2-1, loosen 2 screws with the 2.0mm hex driv-...

  • Page 21: Relay Lens Adjustment

    Optical Adjustments Relay lens-Out adjustment Turn the projector on by a state of without FPC cables. Adjust the adjustment base of relay lens ass’y to make color unifor- mity in white. 1) If the cyan bar appears on the left or right of the screen as shown in Fig.4-1, loosen 1 screw with the 2.0mm hex driver, and White...

  • Page 22: Electric Adjustments

    ■ Electrical Adjustments ● Service Adjustment Menu Operation To enter the service mode To enter the “Service Mode”, press and hold the MENU and IMAGE button on the projector at the same time for more than 3 seconds. The service menu appears on the screen as follows. To adjust service data Select the adjustment group no.

  • Page 23: Circuit Adjustments

    Electrical Adjustments ● Circuit Adjustments CAUTION: The each circuit has been made by the fine adjustment at factory. Do not attempt to adjust the follow- ing adjustments except requiring the readjustments in servicing otherwise it may cause loss of per- formance and product safety.
  • Page 24 Electrical Adjustments PC Pedestal adjustment Black Level adjustment 1. Receive the 16-step gray scale computer signal with 1. Receive the 16-step gray scale computer signal with Input 1 [COMPUTER] mode. Input 1 [COMPUTER] mode. 2. Enter the service mode. 2. Enter the service mode. TP531 TP531 3.
  • Page 25 Electrical Adjustments 8. Select item no. “ and change data value to adjust PC Gamma Shift adjustment the pedestal level and black level to be the same 1. Receive the 16-step gray scale computer signal with level. Input 1 [COMPUTER] mode. 2.
  • Page 26 Electrical Adjustments HDTV Gain adjustment VIDEO Pedestal adjustment 1. Receive the 16-step gray scale component signal 1. Receive the 16-step gray scale video signal with [1080i] with Input 3 [COMPONENT] mode. Input 3 [VIDEO] mode. 2. Enter the service mode. 2.
  • Page 27 A/D Offset adjustment Video Gamma Shift adjustment 1. Receive the 16-step gray scale video signal with 1. Receive the 16-step gray scale video signal with Input 3 [VIDEO] mode. Input 3 [VIDEO] mode. 2. Enter the service mode. 2. Enter the service mode. TP531 3.

  • Page 28: Service Adjustment Data Table

    Electrical Adjustments ● Service Adjustment Data Table These initial values are the reference data written from the CPU ROM to memory IC when replaced new memory IC. The adjust- ment items indicated with “✻” are required to readjust following to the “Electrical adjustments”. Other items should be used with the initial data value.

  • Page 29: Electrical Adjustments

    Electrical Adjustments Adjustment Item Initial Value Range Input source / Description HSEP_SEL 0 ~ 1 CR_OFFSET1 0 ~ 15 CB_OFFSET1 0 ~ 15 BLK_BOTTOM 0 ~ 15 R-Y/R 12/13/6/6 0 ~ 15 NT,NT443,480i,480p/PAL,PALM,PALN,PAL60,SECAM,575i,575p/1035i/1080i,720p R-Y/B 12/15/5/5 0 ~ 15 G-Y/R 12/12/8/8 0 ~ 15 G-Y/B 5/4/10/10...
  • Page 30 Electrical Adjustments Adjustment Item Initial Value Range Input source / Description Real/Cinema GAMMA 15 512/512 385 ~ 639 r_mid2_level 0 ~ 1023 _C9D r_mid1_level 0 ~ 1023 _C9E r_max_level 0 ~ 1023 _C9F g_mid2_level 0 ~ 1023 _CA1 g_mid1_level 0 ~ 1023 _CA2 g_max_level 0 ~ 1023...
  • Page 31 Electrical Adjustments Adjustment Item Initial Value Range Input source / Description FAN_CONTROL_SW 0 or 1 0: Auto-FanControl 1: Manual FAN_A_SPEED 0 ~ 255 Effective when FAN_CONTROL_SW set to 1 FAN_B_SPEED 0 ~ 255 FAN_TEMP_A_MONI Read only FAN_TEMP_B_MONI FAN_TEMP_C_MONI Group: 12 PC Real / AV Cinema PC Real Contrast 0 ~ 63 PC Real Brightness...
  • Page 32 Electrical Adjustments Adjustment Item Initial Value Range Input source / Description ICS_R6_OE_Pck 0 ~ 1 ICS_R7_In_Sel 0 ~ 1 ICS_R7_Osc_Div 0 ~ 127 NTSC & 480i / PAL & SECAM & 525i / 1035i & 1080i60 / 1080i50 / 720P / 480P / 575P ICS_R8_PLL 0 ~ 15 ICS_R8_DPA...
  • Page 33 Electrical Adjustments Adjustment Item Initial Value Range Input source / Description Group: 518 RGB NTSC Gakaku TOTAL DOTS 1308 0 ~ 2048 DISP DOTS 1024 0 ~ 2048 RGB NTSC H BACK PORCTH 0 ~ 2048 V BACK PORCTH 0 ~ 2048 DISP LINE 0 ~ 2048 CLAMP...

  • Page 34: Test Points And Locations

    Electrical Adjustments Test Points and Locations ● MAIN BOARD TP801 TP351 TP301 TP302 TPENB TPDHS TPRST TPVRST TPDVS IC9401 K25R TP2552 TP2551 TP21B TP21G TP21R K25G TPVS TPHS TP531 TP1531 TP814 TP20R TP815 TP20G TP20B K25B IC6301 TP501 TP1501 IC4201 TP4101CR TP4101CB TP4101Y...

  • Page 35: Troubleshooting

    ■ Troubleshooting No Power The possible causes of No Power are listed below. Please 2. Abnormality occurs on drive signals for power check following and refer to power supply and protection cir- or lamp circuit. cuits diagram in the figure opposite. - Abnormality on power starter signals (FAN_DRIVE/ FAN_SW).
  • Page 36 Troubleshooting Power supply drive and protection diagrams and locations F601 IC1691 SW902 IC1872 SW905 IC1871 LAMP Ass'y LAMP BALLAST UNIT POWER BOARD SW902 F601 SW905 IC1691 Fuse AC IN Interlock sw. Thermal sw. TEMP. SENS. TSW601 IC601 K48E P.F.CONTROL TEMP. SENSOR BOARD Power Oscillator...

  • Page 37: No Picture

    Troubleshooting No Picture The possible causes of No Picture are listed below. Please 3. No picture from both of Video and Computer check following and refer to video signal processing dia- sources. grams in the figure opposite. Check RGB signals at test points TP20R, TP21R, TP20G, TP21G, TP20B and TP21B.
  • Page 38 Troubleshooting Video Signal processing diagrams -38-...

  • Page 39: No Sound

    Troubleshooting No Sound 1. No audio signals at AV input circuit. 3. No audio output signal at speakers. Check audio signals at pins 1, 13 (CG1), 5, 14 (CG2) and Check audio signals at pins 3, 4 and 1, 2 of K16U on M 2, 12 (VIDEO) of IC5011 on AV Board.

  • Page 40: Lens Motor Problems

    Troubleshooting Lens Motor Problems 1. No drive signals supplied at motors Logic Table of IC1611/IC1602/IC1601 Check drive signals at pins 1 and 2 of K16M for focus Input Output Operation motor, pins 3 and 4 of K16M for zoom motor and pins 1 and 2 of K16L for lens shift motor on Power Board.

  • Page 41: Control Port Functions

    ■ Control Port Functions ● System Control & I/O Port Table (IC801) Pin No. Name Function Name Function Polarity PA23/WRHH USB RESET USB Reset Signal Active L PE14/TIOC4C/DACK0/AH IC RESET Power on/off control except FAN and LAMP Active L PA22/WRHL PA21/CASHH RS232C_SW RS232C Output switch signal...
  • Page 42 Control Port Functions Pin No. Name Function Name Function Polarity PD16/D16/IRQ0 reserve PD15/D15 DATA15 Data Bus 15 PD14/D14 DATA14 Data Bus 14 PD13/D13 DATA13 Data Bus 13 PD12/D12 DATA12 Data Bus 12 PD11/D11 DATA11 Data Bus 11 PD10/D10 DATA10 Data Bus 10 PD9/D9 DATA9 Data Bus 9...
  • Page 43 Control Port Functions ● Parallel I/O Expander (IC1801, M66500FP) Pin No. Name Function Name Function Polarity CG_FILTER D_TURBO_SEL DIGITAL TURBO Selection 5 V ±10 % A SW1 Audio SW 1 A SW2 Audio SW 2 SEL_BAISOKU Double Scan Selection IP_CSA CPU Strobe signal for IP Conversion IP+RESETSW CPU reset signal for IP Conversion...
  • Page 44 Control Port Functions ● IIC Bus I/O Expander (IC1641, M62320FP) Port Functions Pin No. Name Function Action Serial Data output port (Not connected) IIC BUS SCL IIC BUS SDA FOUCS+ FOUCS + Active H FOUCS- FOUCS - Active H ZOOM+ ZOOM + Active H ZOOM-...

  • Page 45: Control Port Functions

    Control Port Functions ● IIC Bus DA Converter (IC3551, M62399FP) Port Functions Pin No. Name Function Serial Data output port (Not connected) IIC BUS SCL IIC BUS SDA Not used V_COMR V_COMG V_COMB VrefL DAC Lower Reference Voltage input VrefU 1 DAC Upper Reference Voltage input (CH5~CH8) VrefU2 DAC Upper Reference Voltage input (CH1~CH 4)

  • Page 46: Waveforms

    ■ Waveforms VIDEO-IN <TP4111Y> Y-IN <IC3101-5> C-IN <IC3101-7> H-SYNC-OUT <IC3101-7> V-SYNC-OUT <IC3101-4> Sandcastle-OUT <IC3101-10> Y-IN <TP4101Y> CB-IN <TP4101CB> CR-IN <TP4101CR> R <TP4151R/IC201-12> G <TP4151G/IC201-10> B <TP4151B/IC201-8> CB-IN <TP2301R> Y-IN <TP2301G> CR-IN <TP2301B> -46-...

  • Page 47: Waveforms

    Waveforms R <TP21R> G <TP21G> B <TP21B> R-S&H OUT <TP561/TP1561> G-S&H OUT <TP531/TP1531> B-S&H OUT <TP501/TP1501> -47-...

  • Page 48: Cleaning

    ■ Cleaning After long periods of use, dust and other particles will accumulate on the LCD panel, prism, mirror, polarized glass, lens, etc., causing the picture to darken or color to blur. If this occurs, clean the inside of optical unit. Remove dust and other particles using air spray.

  • Page 49: Ic Block Diagrams

    ■ IC Block Diagrams ● AD8183ARU/AD8185ARU <Selector, IC101, IC201, IC5203> ● BA7078AF <Sync Detector, IC7141> -49-...
  • Page 50 IC Block Diagrams ● BH3540 <Volume Control, IC1652> ● CXA2101AQ <RGB Matrix, IC4101> -50-...
  • Page 51 IC Block Diagrams ● FA5332M <P. F. Controller, IC601> ● FA7612CA <PWC Controller, IC6602, IC6603, IC6616> -51-...
  • Page 52 IC Block Diagrams ● ICS1523M <Clock Driver, IC4231> ● L3E06070 <D/A-Sample & Hold, > IC501, IC531, IC561, IC1501, IC1531, IC1561 -52-...
  • Page 53 IC Block Diagrams ● L3E07050 <Color, Gamma Correction & Timing Controller , IC401> ● LB1641 <Motor Drive, IC1602, IC1611> -53-...
  • Page 54 IC Block Diagrams ● LB1645 <Motor Drive, IC1601> ● LC863316 <SUB CPU, IC1851> -54-...
  • Page 55 IC Block Diagrams ● ML60851 <USB I/F, IC9801> ● M62393 <D/A, IC212, IC2381> -55-...
  • Page 56 IC Block Diagrams ● M62399 <D/A, IC3501, IC3551> ● PW365 <System Control & Scan Converter, IC301> -56-...
  • Page 57 IC Block Diagrams ● SII161ACT <DVI I/F, IC8001> ● STR-Z2156 <Power Switching, IC651> -57-...
  • Page 58 IC Block Diagrams ● TA1287 <RGB/YUV Converter, IC4551> ● TB1274AF <Video Decoder, IC1101> -58-...

  • Page 59: Ic Block Diagrams

    IC Block Diagrams ● TDA7056 <Audio Output, IC1631, IC1632> -59-...

  • Page 60: Service Parts Lists

    ■ Electrical Parts List MA8-XP4500, MB8-XP4000 Product safety should be considered when a component replacement is made in any area of a projector. Components indicated by a mark in this parts list and the circuit diagram show components whose value have special significance to product safety.
  • Page 61 MA8-XP4500, MB8-XP4000 Electrical Parts List Note: Parts order must contain Chassis No., Part No., and Descriptions. ● OUT OF CIRCUIT BOARD RC1 Board Sensor1 Board FN901 Cooling Fan FN903 Cooling Fan Drive Board Power Board Sub Power Main Board Board Lamp Ballast FN902 Board...

  • Page 62: Main Board

    MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description OUT OF CIRCUIT BOARD Q4101 405 014 4509 TR 2SC2412K T146 R Q4102 405 134 5905 TR 2SA1037AK-T146-R Q4103 405 014 4509 TR 2SC2412K T146 R LF901 645 045 2154 UNIT,NOISE FILTER...
  • Page 63 MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description IC3301 409 478 1302 IC LC24049A-TA7 C1107 403 164 0204 CERAMIC 0.1U Z IC3302 409 397 3005 IC TC7SET04FU-(TE85L) C1108 403 164 0204 CERAMIC 0.1U Z IC3303 409 439 8906 IC TC7WH125FU...
  • Page 64 MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description C1561 403 304 1801 ELECT 100U M 6.3V C218 403 162 4006 ELECT 22U M 6.3V C1562 403 164 0204 CERAMIC 0.1U Z C219 403 157 2505 CERAMIC 27P J C1563...
  • Page 65 MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description C252 403 164 0204 CERAMIC 0.1U Z C311 403 164 0204 CERAMIC 0.1U Z C2522 403 304 3102 ELECT 22U M C3111 403 164 0204 CERAMIC 0.1U Z C2523...
  • Page 66 MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description C343 403 164 0204 CERAMIC 0.1U Z C4136 403 283 6309 CERAMIC 1U Z C3501 403 164 0204 CERAMIC 0.1U Z C4137 403 322 1708 ELECT 22U M C3502...
  • Page 67 MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description C4238 403 164 0204 CERAMIC 0.1U Z C533 403 164 0204 CERAMIC 0.1U Z C4239 403 304 1801 ELECT 100U M 6.3V C534 403 164 0204 CERAMIC 0.1U Z C4240...
  • Page 68 MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description C808 403 215 1006 CERAMIC 470P J 645 021 4943 R-NETWORK 22X4 1/16W C809 403 283 6309 CERAMIC 1U Z RB409 645 037 0663 R-NETWORK 22X4 0.063W C811 403 164 0204 CERAMIC...
  • Page 69 MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description R1114 401 105 7305 MT-GLAZE 820 JA 1/16W R165 401 105 5301 MT-GLAZE 4.7K JA 1/16W R1116 401 105 6605 MT-GLAZE 6.8K JA 1/16W R1804 401 105 0603 MT-GLAZE 10K JA 1/16W...
  • Page 70 MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description R2107 401 105 0504 MT-GLAZE 1K JA 1/16W R250 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R2108 401 105 0504 MT-GLAZE 1K JA 1/16W R2501 401 105 0405 MT-GLAZE 100 JA 1/16W...
  • Page 71 MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description R277 401 105 4106 MT-GLAZE 3.3K JA 1/16W R3213 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R278 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R3214 401 105 7909 MT-GLAZE 0.000 ZA 1/16W...
  • Page 72 MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description R3501 401 105 0405 MT-GLAZE 100 JA 1/16W R4124 401 105 2805 MT-GLAZE 2.2K JA 1/16W R3502 401 105 0405 MT-GLAZE 100 JA 1/16W R4125 401 105 0504 MT-GLAZE 1K JA 1/16W...
  • Page 73 MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description R4208 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R436 401 105 3901 MT-GLAZE 33 JA 1/16W R4209 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R437 401 105 3901 MT-GLAZE 33 JA 1/16W...
  • Page 74 MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description R4856 401 105 2904 MT-GLAZE 22K JA 1/16W R818 401 105 5301 MT-GLAZE 4.7K JA 1/16W R4857 401 105 0405 MT-GLAZE 100 JA 1/16W R819 401 105 7909 MT-GLAZE 0.000 ZA 1/16W...
  • Page 75 MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description R9401 401 105 0603 MT-GLAZE 10K JA 1/16W L4104 401 037 5004 MT-GLAZE 0.000 ZA 1/10W R9402 401 105 0603 MT-GLAZE 10K JA 1/16W L4105 645 001 4512 INDUCTOR,10U K R9403...
  • Page 76 MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description X361 645 047 6587 OSC,CRYSTAL 26.000MHZ C109 403 149 9208 CERAMIC 0.01U Z X362 645 047 6846 OSC,CRYSTAL 24.000MHZ C111 403 164 0204 CERAMIC 0.1U Z X801 645 035 2249 OSC,CRYSTAL 6.7584MHZ...
  • Page 77 MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description C5274 403 157 3809 CERAMIC 120P J R111 401 105 0405 MT-GLAZE 100 JA 1/16W C5291 403 149 9208 CERAMIC 0.01U Z R112 401 105 0405 MT-GLAZE 100 JA 1/16W C7143...
  • Page 78 MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description R5012 401 105 0405 MT-GLAZE 100 JA 1/16W L1023 645 045 6183 FILTER,EMI 25MHZ R5013 401 105 0405 MT-GLAZE 100 JA 1/16W L1024 645 045 6183 FILTER,EMI 25MHZ R5014 401 105 7909...

  • Page 79: Power Board

    MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description D2007 407 223 1102 ZENER DIODE 02DZ6.2Y(TPH3 IC651 409 421 4701 IC STR-Z2156 D2008 407 223 1102 ZENER DIODE 02DZ6.2Y(TPH3 IC681 409 344 6509 IC UPC1093T-E1 D2009 407 223 1102 ZENER DIODE 02DZ6.2Y(TPH3...
  • Page 80 MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description DIODE R622 401 217 4100 MT-GLAZE 22K FA 1/16W R623 401 105 4304 MT-GLAZE 330K JA 1/16W DB601 408 045 4906 DIODE RBV-1506 LF-B R624 401 105 2607 MT-GLAZE 22 JA 1/16W...
  • Page 81 MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description 405 047 9106 TR 2SB1204-T-TL C6669 403 348 3700 ELECT 470U M Q6628 405 014 4509 TR 2SC2412K T146 R C6671 403 113 3805 CERAMIC 1000P K Q6629 405 156 0209...
  • Page 82 MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description R6677 401 230 2503 MT-GLAZE 1K FA 1/16W D6601TM 407 004 1000 DIODE DCC010-TB R6678 401 105 2607 MT-GLAZE 22 JA 1/16W D6602 407 223 0907 ZENER DIODE 02DZ4.7Y(TPH3 R6679 401 247 0202...
  • Page 83 MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description C1626 403 331 0303 ELECT 470U M D1604 407 149 0807 DIODE 1SS355-TE-17 C1631 403 325 8605 ELECT 220U M D1611 407 223 1003 ZENER DIODE 02DZ5.1Y(TPH3 C1632 403 323 8805 CERAMIC...
  • Page 84 RC FRONT BOARD (For Europe, Asia, Africa) 645 011 6131 CORD,POWER-3.0MK 610 293 1839 ASSY,PWB,RC FRONT MA8A (For UK) 645 011 6148 CORD,POWER-3.0MK 1AA0B10C3390C OWNER’S MANUAL FOR PLC-XP45 English 610 293 5165 OWNER’S MANUAL-MA8A CAPACITOR Germany 610 293 5172 OWNER’S MANUAL-MA8A-D C2801...
  • Page 85 MA8-XP4500, MB8-XP4000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description -85-...

  • Page 86: Mechanical Parts List

    ■ Mechanical Parts List MA8-XP4500, MB8-XP4000 Note: Parts order must contain Chassis No., Part No., and Descriptions. ● CABINET PARTS -86-...
  • Page 87 Description CABINET PARTS SCREWS-CABINET- 610 293 5493 ASSY,BUTTON-MA8A 412 063 7900 SPECIAL SCREW(SILVER) (Including Key No. 1-a, b, c) (For Model PLC-XP45) 610 293 5554 BUTTON-MA8A 412 062 4009 SPECIAL SCREW 610 294 2637 BUTTON U/D-MA8A (For Model PLC-XP40) 610 293 5875...
  • Page 88 MA8-XP4500, MB8-XP4000 Mechanical Parts List 51-b 51-a 21-a 21-b -88-...

  • Page 89: Optical Parts List

    ■ Optical Parts List MA8-XP4500, MB8-XP4000 Note: Parts order must contain Chassis No., Part No., and Descriptions. 69: Red 70: Green 71: Blue -89-...
  • Page 90 MA8-XP4500, MB8-XP4000 Optical Parts List 53-d 53-d 53-d 53-a: Red 53-b: Blue 53-c: Green -90-...
  • Page 91 MA8-XP4500, MB8-XP4000 Optical Parts List CAUTION: Part must be placed in specified direction when replacing the optical parts. Please see “Optical Parts Disassemblies” for further instructions. -91-...
  • Page 92 SANYO Electric Co., Ltd. (MA8A) Oct. 2001/ 2000 Printed in Japan...

This manual is also suitable for:

Plc-xp40

Table of Contents