Before Operation; Operation Of Remote Control; Laser Pointer Function - Sanyo PLC-XP55L Owner's Manual

BEFORE OPERATION

Left Side
ALL-OFF SWITCH
When using Remote Control Unit,
turn this switch to "ON." And turn it
to "ALL OFF" when it is not used.
INSIDE THE BATTERY
COMPARTMENT BOX
This remote control provide the DIP
switches into the battery compartment
box.
Slide the SW4 (LASER ON/OFF
switch) to "OFF" position. The laser
pointer function is not operated.
Set switches 1-3 as shown in table
below depending on Code No. that you
want to select remote control code.
(Refer to P39.)
DIP SWITCH SETTING
SW4 ........ LASER ON/OFF
SW1 SW2 SW3 Code No.
ON ON ON ON
ON ON OFF
ON OFF ON
ON OFF OFF
OFF ON ON
OFF ON OFF
OFF OFF ON
OFF OFF OFF
This Remote Control Unit emits a laser beam as laser pointer function from Laser Light Window. When LASER button is
pressed, laser light goes on. And when LASER button is being pressed for more than 1 minute or LASER button is released,
light goes off. LASER POINTER INDICATOR lights RED and Laser is emitted with RED light to indicate laser beam is being
emitted.
Laser emitted is a class II laser; therefore, do not look into Laser Light Window or shine laser beam on yourself or other
people. Three marks below are caution labels for laser beam.
CAUTION : Use of controls, adjustments or performance of procedures other than those specified herein may result
hazardous radiation exposure.
LASER POINTER INDICATOR
Laser Light Window

OPERATION OF REMOTE CONTROL

LASER POINTER (Drag ON)
INDICATOR
Lights red while laser beam
is emitted from Laser Light
Window.
Lights green when drag ON
position. (P41)
MUTE BUTTON
Used to mute sound. (P22)
DRAG ON/OFF BUTTON
Used to select drag ON/OFF
position. (P41)
LEFT CLICK BUTTON
Used as a PC mouse in
Wireless Mouse Operation.
Press this button and the
mouse pointer button to drag
a selected screen object.
(P41)
LASER BUTTON
Used to operate Laser Pointer
Function. Laser beam is
emitted while pressing this
button within 1 minute.
When using this Laser Pointer
for more than 1 minute,
release LASER button and
press it again.
FOCUS BUTTON
Code 1 Code 1
Code 2
Used to adjust focus. (P21)
Code 3
Code 4
Code 5
Code 6
Code 7
Code 8

LASER POINTER FUNCTION

AUTO PC ON-OFF
D.ZOOM FREEZE NO SHOW
MUTE
IMAGE
VOLUME- VOLUME+
SELECT
MENU KEYSTONE
LASER
P-TIMER
INPUT 1
COLOR.M
ZOOM INPUT 2
INPUT 3
FOCUS LENS NETWORK
These caution labels are put on remote control.
POWER ON-OFF BUTTON
Used to turn projector on or
off. (P20)
AUTO PC ADJ. BUTTON
Use to operate AUTO PC
Adjustment function. (P25)
IMAGE BUTTON
Used to select image
level. (P28, 32)
KEYSTONE BUTTON
Used to correct keystone
distortion. (P21, 37)
MOUSE POINTER
Used as a PC mouse in
Wireless Mouse Operation.
(P41)
RIGHT CLICK BUTTON
Used as a PC mouse in
Wireless Mouse Operation.
(P41)
LENS SHIFT BUTTON
Used to select LENS
SHIFT function. (P21)
WIRED REMOTE JACK
When using as Wired
Remote Control, connect
Remote Control Cable to
this jack.
Battery installation is
required when using as
Wired Remote Control.
15